Yeastar Technology MyPBX Standard - System Info

MyPBX Standard User Manual
www.yeastar.com Page 108
capture tool „Wireshark‟ in MyPBX.
Users also could specify the destination IP address and port to get the packets.
·IP
Specify the destination IP address to get the packets.
·Port
Specify the destination Port to get the packets.
Figure 3.8.2
3.8.3 System Info
General:
Information about hardware version , firmware version and system uptime.
LAN:
Information about hostname, MAC address, IP address, gateway, Primary
DNS and Secondary DNS.
Disk Usage:
Disk usage information.
Memory Usage:
Memory usage information .