Yeastar Technology MyPBX Standard - APPENDIX F Distinctive Ring Tone Configuration; IP Phone Ring Tone Setup; MyPBX Ring Tone Mapping

MyPBX Standard User Manual
www.yeastar.com Page 144
APPENDIX F How Do I Configure
Distinctive Ring Tones
Step1: On your IP phone, navigate to the Phone settings web configuration
page and find the Distinctive Ring Tone section.
For each custom ring tone, enter the Internal Ringer Text (can be digits or text)
to trigger the ring tone. For example, you may enter “Family”.
e.g.: Yealink‟s IP phone.
Figure E-1
Step2. Configure the „Distinctive Ringtone‟ on MyPBX.
MyPBX web interface, Inbound Routes  Edit Inbound Route, fill in the Internal
Ringer Text on „Distinctive Ringtone‟.