MyPBX Standard User Manual
www.yeastar.com Page 118
starting with 0 will have their first digit stripped off (digit 0) and will be sent
to the SIP Trunk.
Figure 6-3
Now that we have added two outbound dialing rules, any call starting with 9
will be routed to the PSTN, and any number starting with 0 will be routed to
the SIP Trunk.
6.2 Incoming call
6.2.1 Sample Routing to an IVR
Let‟s configure an incoming call to route to the IVR. In the IVR itself, let‟s
configure digit 0 to route the call to extension 500, and digit 1 to route the
To Next Page
Loading...
