MyPBX Standard User Manual
www.yeastar.com Page 95
access, port used for HTTP access and port sued for CGI access.
3.6.5 DHCP Server
Dynamic Host Configuration Protocol (DHCP) is a network protocol that enables
a server to automatically assign an IP address to a computer from a defined
range of numbers (i.e., a scope) configured for a given network. You can set a
local network NTP server for MyPBX here too.
Note: When using „Phone Provisioning‟ for Grandstream IP phone, Enter the IP
address of the server directly, e.g.:192.168.5.150; for other phones using the
default configuration.
Figure 3.6.5
3.6.6 VLAN Settings
A VLAN(Virtual LAN) is a logical local area network (or LAN) that extends beyond
a single traditional LAN to a group of LAN segments, given specific
configurations.
1) VLAN Over Lan
·NO.1
Click the NO.1 you can edit the first VLAN over Lan.
·VLAN Number
.The VLAN Number is a unique value you assign to each VLAN on a single device.
·VLAN IP Address
Set the IP Address for MyPBX VLAN over Lan.
·VLAN Subnet Mask
To Next Page
Loading...
Need help?
General
