MyPBX Standard User Manual
www.yeastar.com Page 77
·Use SSL/TLS to send secure message to server
If the server of sending email needs to authenticate the sender, you need to
select the check box.
Note: Must be selected for Gmail or exchange server.
After filling out the above information, you can click on the „Test Account
Settings‟ button to check whether the setup is OK.
1) If the test is successful, you can use the email safely.
2) If test failed, please check the above information is correct or network is
proper.
Figure 3.5.6
3.5.7 SMS Settings
MyPBX supports SMS to Email and Email to SMS. (Only for GSM trunks)
1) Enable SMS to Email
If you enable this, as soon as the GSM trunks receive small messages, MyPBX
will send the text of this message to the email addresses listed on the Email List.
You can add email addresses to the Email List.
To Next Page
Loading...
Need help?
General
