MyPBX Standard User Manual
www.yeastar.com Page 83
Figure 3.5.10.2
3.5.11 DNIS Settings
DNIS (Dialed Number Identification Service) is a telephone service that
identifies for the receiver of a call the number that the caller dialed.
Note:
1. DID number is not available in PSTN/GSM/UMTS trunks
2. If DID is not configured here, all the calls via this trunk will show the DNIS
instead of the original caller ID
Figure 3.5.11
3.5.12 PIN User Settings
PIN User are used to manage lists of PINs that can be used to access restricted
features such as Outbound Routes. If user use PIN User call out, system will
auto record the PIN in the call detail records.
1) Options
·Access Code
.Dial this code to access PIN.
To Next Page
Loading...
Need help?
General
