MyPBX Standard User Manual
www.yeastar.com Page 91
·Gateway
Which gateway MyPBX will go through when access to the destination network.
·Metric
The cost of a route is calculated by using what are called routing metric. Routing
metrics are assigned to routes by routing protocols to provide measurable
statistic which can be used to judge how useful (how low cost) a route is.
·Interface
Define which internet port to go through.
2) Static Route Rules
You can add new static route rules here.
Figure 3.6.3
3.6.4 Firewall
Firewalls are used to prevent unauthorized Internet users from accessing
private networks connected to the Internet, especially intranets. All
messages entering or leaving the intranet pass through the firewall, which
examines each message and blocks those that do not meet the specified
security criteria.
In order to ensure the safe operation of the system, we suggest to enable
and configure firewall. More detailed configuration and other safety related
configuration, please refer to APPENDIX B MyPBX Security Configuration
Guide.
To Next Page
Loading...
Need help?
General
