MyPBX Standard User Manual
www.yeastar.com Page 65
Figure 3.5.2
3.5.3 Feature Codes
1) General
·One Touch Record
A user may initiate or stop call recording by dialing *1 during a call. (*1 is
default setting)
·Extension for Checking Voicemail
Users can check their Voicemail by dialing *2 on their phone (*2 is default
setting).
·Voicemail for Extension
Users can leave a voicemail to other extensions by dialing # on their phone or
the incoming call could be forwarded to an extension‟s voicemail directly. (# is
default setting).
For example, extension 500 want to leave a message for extension 501, users
can use 500 dial‟#501‟ to enter the voicemail of 501.
·Voicemail main menu
Users can go to the main menu by dialing *02 (*02 is default setting).
·Attended Transfer
Users may transfer an incoming call by dialing *3 on their phone (*3 is default
setting).
·Attended Transfer Timeout
The time out of transferring a call
·Blind Transfer
To Next Page
Loading...
Need help?
General
