MyPBX Standard User Manual
www.yeastar.com Page 66
Users may blind transfer an incoming call by dialing *03 on their phone (*03 is
default setting).
·Call Pickup
Users may pick up an incoming call by dialing *4 on their phone (*4 is default
setting)
·Extension Pickup
Users may pick up a specific extension‟s incoming call by dialing *04+extension
number on their phone (*04 is default setting)
·Intercom
Define the feature code that is used to dial an extension in intercom mode. For
instance setting this value to *5 would allow you to initiate an intercom call with
extension 501 by dialing *5501.
·Normal Spy
In this mode, you can only listen to the extension being spied, for example you
can dial *90501 to monitor extension 501
·Whisper Spy
In this mode you can listen/whisper to the extension being spied, for example,
dialing *91501 to listen to extension 501, you can also talk with 501 too.
·Barge Spy
In this mode, you can barge in both extensions involved the call, for example
dialing *92501 to barge in and talk with all the extensions inside
2) Call Park Preferences
·Call Parking
User may park an incoming call on his own telephone by pressing „*6‟ (*6 is
default setting)
·Extension range used to park calls
User may park an incoming call on a designated extension at first and then pick
up the call again on any other extension.
·Number of seconds a call can be parked before it is recalled.
Defines the number of seconds that a call can be parked before it is recalled to
the station that parked it .
3) Call Forwarding Preferences
·Reset to Defaults
Users may reset all call forward defaults by calling *70 on their phone (*70 is
To Next Page
Loading...
Need help?
General
