Yeastar Technology MyPBX Standard User Manual

MyPBX Standard User Manual
www.yeastar.com Page 88
3.6 Network Settings
3.6.1 LAN Settings
·DHCP
If this option is set, MyPBX will use DHCP to get an available IP address from
your local network. Not recommended.
·Enable SSH
This is the advance way to access the device, you can use the putty software
to access the device. In the SSH access, you can do more advance setting
and debug.
·Port: the default is 8022,
·Hostname
Set the host name for MyPBX.
·IP Address
Set the IP Address for MyPBX.
·Subnet Mask
Set the subnet mask for MyPBX.
·Gateway
Set the gateway for MyPBX.
·Primary DNS
Set the primary DNS for MyPBX.
·Secondary DNS
Set the secondary DNS for MyPBX.
·IP Address2
Set the second IP Address for MyPBX.
·Subnet Mask2
Set the second subnet mask for MyPBX.

Yeastar Technology MyPBX Standard Specifications

General

Brand	Yeastar Technology
Model	MyPBX Standard
Category	PBX
Language	English