Yeastar Technology MyPBX Standard - IP Phone Connection

MyPBX Standard User Manual
www.yeastar.com Page 143
Figure D-4
Step4. Turn on the power and connect the network cable to IP Phone.
Remark: The factory default setting of DHCP for IP Phone is enable, so you can
skip this step to step 5.
If the DHCP is disable, please follow below step to enable it. (e.g.: Yealink‟s IP
Phone).
1. Login IP phone‟s web page.
2. Enable DHCP.
Figure D-5
Step5. Finish.