Yeastar Technology MyPBX Standard User Manual

MyPBX Standard User Manual
www.yeastar.com Page 131
Step 6. Add a firewall rule to accept the remote access of HTTP port.
For example, if the remote access IP is 110.5.14.6, and the port is 80,
the configuration could be as below.
Name: RemoteHTTP
Protocol: TCP
Port: 80:80
IP: 110.5.14.6/255.255.255.255
Action: Accept
Figure 4-7
Step 7. Add a firewall rule to accept remote access of SSH port. For
example: if the remote access IP is 110.5.14.6 and the port is 8022.
Note: If the remote access of SSH port is not needed, this rule is not required.
Name: RemoteSSH
Protocol: TCP
Port: 8022:8022
IP: 110.5.14.6/255.255.255.255
Action: Accept

Yeastar Technology MyPBX Standard Specifications

General

Brand	Yeastar Technology
Model	MyPBX Standard
Category	PBX
Language	English