EasyManuals Logo

Yeastar Technology MyPBX Standard User Manual

Yeastar Technology MyPBX Standard
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #149 background imageLoading...
Page #149 background image
MyPBX Standard User Manual
www.yeastar.com Page 149
N: Any Digit from 2-9
[12345-9] : Any digit in the brackets (in this example, 1,2,3,4,5,6,7,8,9)
The .Character will match any remaining digits. For example, 9011. will match
any phone number that starts with 9011, excluding 9011 itself.
The !will match none remaining digits, and causes the matching process to
complete as soon as it can be determined that no other matches are possible.
·Extension
Define the extension for DID number, this field only valid when use E1 trunk for
this inbound router. You can only input number and '-' in this field, and the
format can be xxx or xxx-xxx. The count of the number must be only one or
equal the count of the DID number.
·Destination
If you don‟t set the extension, you can set the destination of the call here.
Example 1:
Step1: You set the DID number (5503XXX in this example).
Step2: You choose the destination (Ring Group in this example).
The configuration of this example means when the incoming call with DID
number 5503XXX (7 digits number start with 5503) will go to the destination
Ring Group.
If you choose the destination, please leave the Extension form blank.

Table of Contents

Other manuals for Yeastar Technology MyPBX Standard

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yeastar Technology MyPBX Standard and is the answer not in the manual?

Yeastar Technology MyPBX Standard Specifications

General IconGeneral
BrandYeastar Technology
ModelMyPBX Standard
CategoryPBX
LanguageEnglish

Related product manuals