Yeastar Technology MyPBX Standard - Page 15

MyPBX Standard User Manual
www.yeastar.com Page 15
Normal spy: you can only hear the call, but can't talk
Whisper spy: you can hear the call, and can talk with the monitored extension
Barge spy: you can hear the call and talk with them both
Note: for example, if 500 want to monitor extension 501, we need to
enable the 'allow being spied ' for 501, and choose the spy mode for
extension 500.
Then pick up 500 and dial “feature codes + 501” to start monitoring
when 501 is in a call.
If 500 choose „normal spy‟, it should dial‟*90501‟ to start monitoring;
if 500 choose „whisper spy‟, it should dial „*91501‟ to start monitoring;
if 500 choose „barge spy‟, it should dial „*92501‟ to start monitor;
if 500 choose „general spy‟, it can dial „*90501‟,‟*91501‟ or „*92501‟
to start monitor.
11)Call Duration Settings
Setup the max cull duration for every call of this extension, but it‟s
only valid for outbound calls. And if enter „0‟ or leave this blank empty,
the value would be equal to the max call duration configured in the
Option Settings page.
Note: This setting will not be valid for internal calls.