MyPBX Standard User Manual
www.yeastar.com Page 32
2. Add IAX Trunk
Input correct IAX information (provided by VOIP provider). Inaccurate
information will prevent the trunk from registering.
1) General
·Type
IAX – Identifies whether the trunk sends and receives calls by using the VoIP
protocol IAX.
·Provider Name
A unique label to help you identify this trunk when listed in outbound rules,
incoming rules etc. Ex: 'yeastar2'.
·Hostname/IP
Service provider‟s hostname or IP address. 4569 is the standard port number
used by IAX protocol. Don‟t change this part if it is not required.
·Username
Username of IAX account . Used for IAX trunk registration.
·Password
Password of IAX account .
.Online number
Define the online number that expected by „Skype Connect‟ and some other SIP
service providers. Leave this field blank if it's no required.
·Maximum Channels
Controls the maximum number of outbound channels (simultaneous calls) that
can be used on this trunk . Inbound calls are not counted against the maximum.
Set as 0 to specify no maximum.
·Caller ID
Specify the caller ID to use when making outbound calls over this trunk. The
caller ID set in the „extension‟ screen will override the caller ID setting in the
„VOIP trunk‟ screen. Please note that not all the service providers support this
feature. Contact your service provider for more information.
2) DOD Setting
·DOD
Direct Outward Dialing Number.
To Next Page
Loading...
