To Next Page

To Previous Page

MyPBX Standard User Manual

www.yeastar.com Page 43

2) Upload Phonebook

You can upload a phonebook before auto provision, which will be provisioned to

the IP phone when using auto provision feature to configure your IP phones. The

format of phonebook should be *.xml.

Note: All the existing phonebooks of the IP phone will be replaced automatically

if the phonebooks are configured in this way.

3.3.4.4 configure phone

Let's take provisioning yealink as an example

Create New Phone have two modes,

Create New phone in webpage and Upload the IP Phone‟s configure file.

1. Add new phone via webpage

Click „Add Phone‟ and fill in the corresponding information in the popup window.

1) General

· Enabled

Choose yes or no to enable or disable this extension

· NewConfig

If the firmware version number is greater than or equal to 70,please enable this

option.

· MAC address

Input the MAC address of IP phone

·Name

Put the name of this Phone here.

·Manufacturer

You can choose the Manufacturer of IP phone

·Phone Type

Choose the model of your phone. Only for snom phone

·Call Waiting

This call feature allows your phone to accept other incoming calls to an

extension already in an active call.

·Key as Send

Configure the key as send, you choose # ,* or disable it

Yeastar Technology MyPBX Standard User Manual

Other manuals for Yeastar Technology MyPBX Standard