MyPBX Standard User Manual
www.yeastar.com Page 72
will not be delayed or dropped due interference from other lower priority
traffic.When the network capacity is insufficient, QoS could provide priority
to users by setting the value.
5) Advanced Settings
·From Field
Where to get the caller ID in sip packet.
·To Field
Where to get the DID in sip packet.
·180 Ringing
It is set when the telecom provider needs. Usually it is not needed.
·Remote Party ID
Whether send Remote-Party-ID on SIP header. Default no.
·Allow Guest
Whether allow anonymous registration extension. Default: no.
This option is used to avoid some anonymous calls by hackers. More details for
the system security configuration, please refer to APPENDIX B MyPBX Security
Configuration Guide.
·Pedantic
Enable pedantic parameter. Default: no.
·Session -timers
Enable session-timer mode. Default: yes.
·Session-expires
The max refresh interval.
·Session-minse
The min refresh interval, which mustn't be less than 90s .
·Session-refresher
Choose session-refersher, the default is Uas.
To Next Page
Loading...
Need help?
General
