S-Series IP PBX Administrator Guide
28
Table 4-1 Extension Configuration Parameters – Basic
Check the box to set the extension type. You can set the extension
to multiple types.
SIP
IAX
FXS: S2 or SO module should be installed on the device if you
want to create FXS extension.
The extension number that will be associated with this particular
user or phone.
The Caller ID string that appears on outbound calls for this
extension.
For extension registration validation.
The password for the user to register the SIP or IAX account. For
example, 12t3f6.
Yeastar S-Series IP PBX supports SIP forking. SIP forking refers
to the process of “forking” a single SIP call to multiple SIP endpoints.
The value of Concurrent Registrations limits how many SIP endpoints
the extension can be registered.
A character-based name for this user. For example, Bob Jones.
The password for this extension user to log in the system. For
example, 12t3f6.
Email address of this extension user. The email will be used to
recover password, receive forwarding voicemails, receive fax as
an attachment, and receive event notifications.
Mobile Number of this user. The number can receive forwarded
calls and event notifications.
The language of voice prompts. The default is the same with
system language. If more language options are needed, please
download it from "System Prompts" under "Voice Prompts".
Features
Table 4-2 Extension Configuration Parameters – Features
Check this box to enable voicemail for this extension.
Check this box to send voicemail to the user's email address.
Note: to use this feature, "Email Settings" under "System" need to
be configured correctly.
Voicemail password used to access Voicemail system. This
password can contain only numbers.
To Next Page
Loading...
Need help?
General
