Yeastar Technology S20 Administrator's Guide

S-Series IP PBX Administrator Guide
29
Always
Always redirect the call to the designated destination.
 Voicemail: redirect the caller to leave a voice message.
 Extension: redirect the caller to another extension.
 Users' Mobile Number: redirect the caller to the mobile
number filled in User Information.
 Custom Number: fill in the number manually and redirect the
caller to this number.
No Answer
Redirect the call to the designated destination when it is not
answered.
When Busy
Redirect the call when the extension is busy.
Mobility Extension
Enable Mobility Extension
If you enable this setting, when the User's Mobile Number dial into
the system, the phone will have the same user permission with the
desktop extension. So the mobile number will be able to reach the
other extension, dial out with the trunk, and play voicemail.
Mobility Extension
It is the same with the User's Mobile Number. A prefix matching
the outbound route also needs to be filled in.
Ring Simultaneously
When the extension has an incoming call, it rings the mobile
number simultaneously.
Monitor Settings
Allow Being Monitored
Check this option to allow this user to be monitored.
Monitor Mode
Decide how you will monitor another extension's current call.
 None: you will not be allowed to monitor other's call.
 Extensive: all the following 3 modes will be available to use.
 Listen: you can only listen to the call, but can't talk (default
feature code: *90).
 Whisper: you can talk to the extension you're monitoring
without being heard by the other party (default feature code:
*91).
 Barge-in: you can talk to both parties (default feature code:
*92).
Other Settings
Ring Timeout
Customize the timeout in seconds. Phone will stop ringing over the
time defined.
Max Call Duration
Select the maximum call duration in seconds for every call of this
extension. If you wish to customize, enter the value in the text box
directly. This option is valid only for outbound calls.
If you choose “Follow System”, it would be equal to the “Max Call
Duration” value in the “General” page.
Call Waiting
Check this option if the extension should have Call Waiting
capability. If this option is checked, the “When busy” call
forwarding options will not be available. The call waiting function of
IP phone has higher priority than MyPBX call waiting function.

Yeastar Technology S20 Specifications

General

Brand	Yeastar Technology
Model	S20
Category	PBX
Language	English