YOKOGAWA CW240 - Page 115

6-16
IM CW240E
● Types of Clamp-on Probes and Current Ranges
Model of
Clamp-on Probes
96036 200mA 500mA 1A 2A
96033 5A 10A 20A 50A
96030 20A 50A 100A 200A
96031 50A 100A 200A 500A
96032 200A 500A 1000A
96034_1 300A 750A 1500A 3000A
96034_2 200A 500A 1000A 2000A
96034_3 100A 200A 500A 1000A
96035_1 300A 750A 1500A 3000A
96035_2 30A 75A 150A 300A
96034 or 96035: The current range is selected using the switch on a clamp-on current probe.
Function Keys
F1 F2 F3 F4
SEE ALSO
For the specifications of clamp-on probes, see Section 17.2, Specifications of Current
Clamps (Clamp-on Probes). A clamp-on probe is also provided with the User's Manual.
● For Connecting Different Types of Clamp-on Current Probes
• If LOAD is set to multiple loads (LOAD2, LOAD3, or LOAD4), a different
clamp-on probe can be set for each load.
• If WIRING is set to 1P3W3I or 3P4W4I, a clamp-on probe can be separately
set for I4.
• If WIRING is set to Scott Connection (3P3W + 1P3W), a clamp-on probe can
be separately set for the three-phase (3P3W) and single-phase (1P3W)
sides.
6.2 General Settings 1/2