YOKOGAWA DL9040

5-74
IM 701310-17E
:CURSor:HORizontal:TRACe
Function Sets the source trace of the horizontal cursor or
queries the current setting.
Syntax
:CURSor:HORizontal:TRACe {<NRf>}
:CURSor:HORizontal:TRACe?
<NRf> = 1 to 8
Example
:CURSOR:HORIZONTAL:TRACE 1
:CURSOR:HORIZONTAL:TRACE? -> :CURSOR:
HORIZONTAL:TRACE 1
:CURSor:MARKer?
Function Queries all settings related to the marker cursors.
Syntax
:CURSor:MARKer?
Example
:CURSOR:MARKER? -> :CURSOR:MARKER:
CALCULATION:DEFINE1 "T2";DEFINE2 "V2";
DEFINE3 "V3";DEFINE4 "V4";STATE1 0;
STATE2 0;STATE3 0;STATE4 0;:CURSOR:
MARKER:CM1:DT2:STATE 1;:CURSOR:MARKER:
CM1:DT3:STATE 1;:CURSOR:MARKER:CM1:DT4:
STATE 1;:CURSOR:MARKER:CM1:DV2:
STATE 1;:CURSOR:MARKER:CM1:DV3:
STATE 1;:CURSOR:MARKER:CM1:DV4:
STATE 1;:CURSOR:MARKER:CM1:
POSITION 1.000E+00;T:STATE 1;:CURSOR:
MARKER:CM1:TRACE 1;V:STATE 1;:CURSOR:
MARKER:CM2:DT1:STATE 1;:CURSOR:MARKER:
CM2:DT3:STATE 1;:CURSOR:MARKER:CM2:DT4:
STATE 1;:CURSOR:MARKER:CM2:DV1:
STATE 1;:CURSOR:MARKER:CM2:DV3:
STATE 1;:CURSOR:MARKER:CM2:DV4:
STATE 1;:CURSOR:MARKER:CM2:
POSITION 1.000E+00;T:STATE 1;:CURSOR:
MARKER:CM2:TRACE 1;V:STATE 1;:CURSOR:
MARKER:CM3:DT1:STATE 1;:CURSOR:MARKER:
CM3:DT2:STATE 1;:CURSOR:MARKER:CM3:DT4:
STATE 1;:CURSOR:MARKER:CM3:DV1:
STATE 1;:CURSOR:MARKER:CM3:DV2:
STATE ......
:CURSor:MARKer:CALCulation?
Function Queries all settings related to calculation items of the
marker cursors.
Syntax
:CURSor:MARKer:CALCulation?
Example
:CURSOR:MARKER:CALCULATION? -> :CURSOR:
MARKER:CALCULATION:
DEFINE1 "T2";DEFINE2 "V2";DEFINE3 "V3";
DEFINE4 "V4";STATE1 0;STATE2 0;
STATE3 0;STATE4 0
:CURSor:MARKer:CALCulation:ALL
Function Turns ON/OFF all calculation items of the marker
cursors.
Syntax
:CURSor:MARKer:CALCulation:ALL
{<Boolean>}
Example
:CURSOR:MARKER:CALCULATION:ALL ON
:CURSor:MARKer:CALCulation:DEFine<x>
Function Sets the equation of the calculation item of the
marker cursors or queries the current setting.
Syntax
:CURSor:MARKer:CALCulation:DEFine<x>
{<String>}
:CURSor:MARKer:CALCulation:DEFine<x>?
<x> = 1 to 4
<String> = Up to 128 characters
Example
:CURSOR:MARKER:CALCULATION:DEFINE1 "T1"
:CURSOR:MARKER:CALCULATION:DEFINE1?
-> :CURSOR:MARKER:CALCULATION:
DEFINE1 "T1"
:CURSor:MARKer:CALCulation:STATe<x>
Function Turns ON/OFF the calculation item of the marker
cursors or queries the current setting.
Syntax
:CURSor:MARKer:CALCulation:STATe<x>
{<Boolean>}
:CURSor:MARKer:CALCulation:STATe<x>?
<x> = 1 to 4
Example
:CURSOR:MARKER:CALCULATION:STATE1 ON
:CURSOR:MARKER:CALCULATION:STATE1?
-> :CURSOR:MARKER:CALCULATION:STATE1 1
:CURSor:MARKer:CALCulation:VALue<x>?
Function Queries the measured value of the calculation item of
the marker cursors.
Syntax
:CURSor:MARKer:CALCulation:VALue<x>?
<x> = 1 to 4
Example
:CURSOR:MARKER:CALCULATION:VALUE1?
-> :CURSOR:MARKER:CALCULATION:
VALUE1 0.000E+00
:CURSor:MARKer:CM<x>?
Function Queries all settings related to the marker cursor.
Syntax
:CURSor:MARKer:CM<x>?
<x> = 1 to 4
Example
:CURSOR:MARKER:CM1? -> :CURSOR:MARKER:
CM1:DT2:STATE 1;:CURSOR:
MARKER:CM1:DT3:STATE 1;:CURSOR:MARKER:
CM1:DT4:STATE 1;:CURSOR:MARKER:CM1:DV2:
STATE 1;:CURSOR:MARKER:CM1:DV3:
STATE 1;:CURSOR:MARKER:CM1:DV4:
STATE 1;:CURSOR:MARKER:CM1:
POSITION 1.000E+00;T:STATE 1;:CURSOR:
MARKER:CM1:TRACE 1;V:STATE 1
5.9 CURSor Group