5-1
IM 701310-17E
Commands
5.1 List of Commands
Command Function Page
ACQuire Group
:ACQuire?
Queries all settings related to the waveform acquisition. 5-34
:ACQuire:AVERage?
Queries all settings related to averaging and the waveform acquisition count. 5-34
:ACQuire:AVERage:COUNt
Sets the waveform acquisition count of averaging mode or queries the
current setting.
5-34
:ACQuire:AVERage:EWEight
Sets the attenuation constant when averaging mode is used infinitely or
queries the current setting.
5-34
:ACQuire:HRMode
Turns ON/OFF the high resolution mode or queries the current setting. 5-34
:ACQuire:INTERLeave
Turns ON/OFF interleave or queries the current setting. 5-34
:ACQuire:INTERPolate
Turns ON/OFF data interpolation or queries the current setting. 5-34
:ACQuire:MODE
Sets the waveform acquisition mode or queries the current setting. 5-34
:ACQuire:REPetitive
Turns ON/OFF the repetitive sampling or queries the current setting. 5-34
:ACQuire:RLENgth
Sets the record length or queries the current setting. 5-34
ANALysis Group
:ANALysis?
Queries all settings related to the analysis function. 5-35
:ANALysis:AHIStogram<x>?
Queries all settings related to the accumulated histogram function. 5-35
:ANALysis:AHIStogram<x>:
HORizontal
Sets the horizontal range of the accumulated histogram or queries the
current setting.
5-35
:ANALysis:AHIStogram<x>:
MEASure?
Queries all settings related automated measurement of the accumulated
histogram.
5-36
:ANALysis:AHIStogram<x>:
MEASure:CURSor?
Queries all settings related to cursor measurement of the accumulated
histogram.
5-36
:ANALysis:AHIStogram<x>:
MEASure:CURSor:BASic?
Queries all settings related to basic items of the cursor of the accumulated
histogram.
5-36
:ANALysis:AHIStogram<x>:
MEASure:CURSor[:BASic]:ALL
Turns ON/OFF all basic items of the cursor of the accumulated histogram. 5-36
:ANALysis:AHIStogram<x>:
MEASure:CURSor[:BASic]:C<x>?
Queries all settings related to the cursor of the accumulated histogram. 5-37
:ANALysis:AHIStogram<x>:
MEASure:CURSor[:BASic]:C<x>:
STATe
Turns ON/OFF the cursor of the accumulated histogram or queries the
current setting.
5-37
:ANALysis:AHIStogram<x>:
MEASure:CURSor[:BASic]:C<x>:
VALue?
Queries the measured value of the cursor of the accumulated histogram. 5-37
:ANALysis:AHIStogram<x>:
MEASure:CURSor[:BASic]:DC?
Queries all settings related to measured values between cursors of the
accumulated histogram.
5-37
:ANALysis:AHIStogram<x>:
MEASure:CURSor[:BASic]:DC:STATe
Turns ON/OFF the measured values between cursors of the accumulated
histogram or queries the current setting.
5-37
:ANALysis:AHIStogram<x>:
MEASure:CURSor[:BASic]:DC:
VALue?
Queries the measured value between cursors of the accumulated histogram. 5-37
:ANALysis:AHIStogram<x>:
MEASure:CURSor:CALCulation?
Queries all settings related to calculation items of the cursor of the
accumulated histogram.
5-37
:ANALysis:AHIStogram<x>:
MEASure:CURSor:CALCulation:ALL
Turns ON/OFF all calculation items of the cursor of the accumulated
histogram.
5-37
:ANALysis:AHIStogram<x>:
MEASure:CURSor:CALCulation:
DEFine<x>
Sets the equation of the calculation item of the cursor of the accumulated
histogram or queries the current setting.
5-38
:ANALysis:AHIStogram<x>:
MEASure:CURSor:CALCulation:
STATe<x>
Turns ON/OFF the calculation item of the cursor of the accumulated
histogram or queries the current setting.
5-38
:ANALysis:AHIStogram<x>:
MEASure:CURSor:CALCulation:
VALue<x>?
Queries the measured value of the calculation item of the cursor of the
accumulated histogram.
5-38
:ANALysis:AHIStogram<x>:
MEASure:CURSor:HLINkage
Turns ON/OFF the horizontal cursor link of the accumulated histogram or
queries the current setting.
5-38
Chapter 5 Commands
To Next Page
Loading...
Need help?
General
