YOKOGAWA DL9040

5-72
IM 701310-17E
5.9 CURSor Group
:CURSor:HORizontal:BASic?
Function Queries all settings related to basic items of the
horizontal cursors.
Syntax
:CURSor:HORizontal:BASic?
Example
:CURSOR:HORIZONTAL:BASIC? -> :CURSOR:
HORIZONTAL:BASIC:DV:STATE 1;:
CURSOR:HORIZONTAL:BASIC:LINKAGE 1;V1:
POSITION 1.000E+00;STATE 0;:CURSOR:
HORIZONTAL:BASIC:V2:POSITION 1.000E+00;
STATE 0
:CURSor:HORizontal[:BASic]:ALL
Function Turns ON/OFF all basic items of the horizontal
cursors.
Syntax
:CURSor:HORizontal[:BASic]:ALL
{<Boolean>}
Example
:CURSOR:HORIZONTAL:BASIC:ALL ON
:CURSor:HORizontal[:BASic]:DV?
Function Queriesallsettingsrelatedtothe∆Vmeasurementof
the horizontal cursors.
Syntax
:CURSor:HORizontal[:BASic]:DV?
Example
:CURSOR:HORIZONTAL:BASIC:DV?
-> :CURSOR:HORIZONTAL:BASIC:DV:STATE 1
:CURSor:HORizontal[:BASic]:DV:STATe
Function TurnsON/OFFthe∆Vmeasurementofthehorizontal
cursors or queries the current setting.
Syntax
:CURSor:HORizontal[:BASic]:DV:STATe
{<Boolean>}
:CURSor:HORizontal[:BASic]:DV:STATe?
Example
:CURSOR:HORIZONTAL:BASIC:DV:STATE ON
:CURSOR:HORIZONTAL:BASIC:DV:STATE?
-> :CURSOR:HORIZONTAL:BASIC:DV:STATE 1
:CURSor:HORizontal[:BASic]:DV:VALue?
Function Queries the voltage value between the horizontal
cursors.
Syntax
:CURSor:HORizontal[:BASic]:DV:VALue?
Example
:CURSOR:HORIZONTAL:BASIC:DV:VALUE?
-> :CURSOR:HORIZONTAL:BASIC:DV:
VALUE 1.000E+00
:CURSor:HORizontal[:BASic]:LINKage
Function Turns ON/OFF the horizontal cursor link or queries
the current setting.
Syntax
:CURSor:HORizontal[:BASic]:
LINKage {<Boolean>}
:CURSor:HORizontal[:BASic]:LINKage?
Example
:CURSOR:HORIZONTAL:BASIC:LINKAGE ON
:CURSOR:HORIZONTAL:BASIC:LINKAGE?
-> :CURSOR:HORIZONTAL:BASIC:LINKAGE 1
:CURSor?
Function Queries all settings related to the cursor
measurement.
Syntax
:CURSor?
Example
:CURSOR? -> :CURSOR:DISPLAY 1;
HORIZONTAL:BASIC:DV:STATE 1;:CURSOR:
HORIZONTAL:BASIC:LINKAGE 1;V1:
POSITION 1.000E+00;STATE 0;:CURSOR:
HORIZONTAL:BASIC:V2:POSITION 1.000E+00;
STATE 0;:CURSOR:HORIZONTAL:CALCULATION:
DEFINE1 "V1";DEFINE2 "V2";DEFINE3 "V1";
DEFINE4 "V2";STATE1 0;STATE2 0;
STATE3 0;STATE4 0;:CURSOR:HORIZONTAL:
TRACE 1;:CURSOR:MARKER:CALCULATION:
DEFINE1 "T2";DEFINE2 "V2";DEFINE3 "V3";
DEFINE4 "V4";STATE1 0;STATE2 0;
STATE3 0;STATE4 0;:CURSOR:MARKER:CM1:
DT2:STATE 1;:CURSOR:MARKER:CM1:DT3:
STATE 1;:CURSOR:MARKER:CM1:DT4:
STATE 1;:CURSOR:MARKER:CM1:DV2:
STATE 1;:CURSOR:MARKER:CM1:DV3:
STATE 1;:CURSOR:MARKER:CM1:DV4:
STATE 1;:CURSOR:MARKER:CM1:
POSITION 1.000E+00;T:STATE 1;:CURSOR:
MARKER:CM1:TRACE 1;V:STATE 1;:CURSOR:
MARKER:CM2:DT1:STATE 1;:CURSOR:MARKER:
CM2:DT3:STATE 1;:CURSOR:MARKER:CM2:DT4:
STATE 1;:CURSOR:MARKER:CM2:DV1:
STATE 1;:CURSOR:MARKER:CM2:DV3:
STATE ......
:CURSor:DISPlay
Function Turns ON/OFF the cursor or queries the current
setting.
Syntax
:CURSor:DISPlay {<Boolean>}
:CURSor:DISPlay?
Example
:CURSOR:DISPLAY ON
:CURSOR:DISPLAY? -> :CURSOR:DISPLAY 1
:CURSor:HORizontal?
Function Queries all settings related to the horizontal cursors.
Syntax
:CURSor:HORizontal?
Example
:CURSOR:HORIZONTAL? -> :CURSOR:
HORIZONTAL:BASIC:DV:STATE 1;:
CURSOR:HORIZONTAL:BASIC:LINKAGE 1;V1:
POSITION 1.000E+00;STATE 0;:CURSOR:
HORIZONTAL:BASIC:V2:POSITION 1.000E+00;
STATE 0;:CURSOR:HORIZONTAL:
CALCULATION:DEFINE1 "V1";DEFINE2 "V2";
DEFINE3 "V1";DEFINE4 "V2";STATE1 0;
STATE2 0;STATE3 0;STATE4 0;:CURSOR:
HORIZONTAL:TRACE 1