YOKOGAWA DL9040

5-122
IM 701310-17E
5.18 MEASure Group
:MEASure:CALCulation:COUNt<x>?
Function Queries the statistical processing count of the
calculation item.
Syntax
:MEASure:CALCulation:COUNt<x>?
<x> = 1 to 4
Example
:MEASURE:CALCULATION:COUNT1?
-> :MEASURE:CALCULATION:COUNT1 1
:MEASure:CALCulation:DEFine<x>
Function Sets the equation of the calculation item or queries
the current setting.
Syntax
:MEASure:CALCulation:DEFine<x>
{<String>}
:MEASure:CALCulation:DEFine<x>?
<x> = 1 to 4
<String> = Up to 128 characters
Example
:MEASURE:CALCULATION:DEFINE1 "MAX(C1)"
:MEASURE:CALCULATION:DEFINE1? -> :
MEASURE:CALCULATION:DEFINE1 "MAX(C1)"
:MEASure:CALCulation:{MAXimum<x>|
MEAN<x>|MINimum<x>|SDEViation<x>}?
Function Queries the statistical value of the calculation item.
Syntax
:MEASure:CALCulation:{MAXimum<x>|
MEAN<x>|MINimum<x>|SDEViation<x>}?
<x> of MAXimum<x> = 1 to 4
<x> of MEAN<x> = 1 to 4
<x> of MINimum<x> = 1 to 4
<x> of SDEViation<x> = 1 to 4
Example (The following is an example for the maximum
value.)
:MEASURE:CALCULATION:MAXIMUM1?
-> :MEASURE:CALCULATION:
MAXIMUM1 1.000E+00
:MEASure:CALCulation:STATe<x>
Function Turns ON/OFF the calculation item or queries the
current setting.
Syntax
:MEASure:CALCulation:STATe<x>
{<Boolean>}
:MEASure:CALCulation:STATe<x>?
<x> = 1 to 4
Example
:MEASURE:CALCULATION:STATE1 ON
:MEASURE:CALCULATION:STATE1?
-> :MEASURE:CALCULATION:STATE1 1
:MEASure?
Function Queries all settings related to the automated
measurement of waveform parameters.
Syntax
:MEASure?
Example
:MEASURE? -> :MEASURE:CALCULATION:
DEFINE1 "MAX(C1)";
DEFINE2 "MIN(C2)";DEFINE3 "HIGH(C3)";
DEFINE4 "LOW(C4)";STATE1 0;STATE2 0;
STATE3 0;STATE4 0;:MEASURE:CONTINUOUS:
COUNT 0;:MEASURE:CYCLE:TRACE 1;:
MEASURE:DISPLAY 1;MODE BASIC;THRESHOLD:
TRACE1:AUTO PTOPEAK;LHYSTERESIS:
HYSTERESIS 1.000E+00;LEVEL 0.000E+00;:
MEASURE:THRESHOLD:TRACE1:MODE AUTO;
ULOWER:RANGE 2.000E+00,1.000E+00;:
MEASURE:THRESHOLD:TRACE2:AUTO PTOPEAK;
LHYSTERESIS:HYSTERESIS 1.000E+00;
LEVEL 0.000E+00;:MEASURE:THRESHOLD:
TRACE2:MODE AUTO;ULOWER:
RANGE 2.000E+00,1.000E+00;:MEASURE:
THRESHOLD:TRACE3:AUTO PTOPEAK;
LHYSTERESIS:HYSTERESIS 1.000E+00;
LEVEL 0.000E+00;:MEASURE:THRESHOLD:
TRACE3:MODE AUTO;ULOWER:
RANGE 2.000E+00,1.000E+00;:MEASURE:
THRESHOLD:TRACE4:AUTO PTOPEAK;
LHYSTERESIS:HYSTERESIS 1.000E+00;
LEVEL 0.000E+00;:MEASURE:THRESHOLD:
TRACE4:MODE AUTO;ULOWER:
RANGE 2.000E+00,1.000E+00;:MEASURE:
THRESHOLD:TRACE5:AUTO PTOPEAK;
LHYSTERESIS:HYSTERESIS 1.000E+00;
LEVEL 0.000E+00;:MEASURE:THRESHOLD:
TRACE5:MODE AUTO;ULOWER:RANGE ......
:MEASure:CALCulation?
Function Queries all settings related to calculation items.
Syntax
:MEASure:CALCulation?
Example
:MEASURE:CALCULATION? -> :MEASURE:
CALCULATION:DEFINE1 "MAX(C1)";
DEFINE2 "MIN(C2)";DEFINE3 "HIGH(C3)";
DEFINE4 "LOW(C4)";STATE1 0;STATE2 0;
STATE3 0;STATE4 0
:MEASure:CALCulation:ALL
Function Turns ON/OFF all calculation items.
Syntax
:MEASure:CALCulation:ALL {<Boolean>}
Example
:MEASURE:CALCULATION:ALL ON