YOKOGAWA DL9040 User Manual

5-143
IM 701310-17E
Commands
1
2
3
4
5
6
App
Index
:TELecomtest:EYEPattern?
Function Queries all settings related to the eye pattern.
Syntax
:TELecomtest:EYEPattern?
Example
:TELECOMTEST:EYEPATTERN?
-> :TELECOMTEST:EYEPATTERN:DBERATE:
STATE 1;:TELECOMTEST:EYEPATTERN:
EHEIGHT:STATE 1;:TELECOMTEST:
EYEPATTERN:EWIDTH:STATE 1;:
TELECOMTEST:EYEPATTERN:FALL:STATE 1;:
TELECOMTEST:EYEPATTERN:JITTER1:
STATE 1;:TELECOMTEST:EYEPATTERN:
JITTER2:STATE 1;:TELECOMTEST:
EYEPATTERN:PCROSSING:STATE 1;:
TELECOMTEST:EYEPATTERN:PDUTYCYCLE:
STATE 1;:TELECOMTEST:EYEPATTERN:
QFACTOR:STATE 1;:TELECOMTEST:
EYEPATTERN:RISE:STATE 1;:TELECOMTEST:
EYEPATTERN:SDBASE:STATE 1;:TELECOMTEST:
EYEPATTERN:SDTOP:STATE 1;:
TELECOMTEST:EYEPATTERN:T1CROSSING:
STATE 1;:TELECOMTEST:EYEPATTERN:
T2CROSSING:STATE 1;:TELECOMTEST:
EYEPATTERN:TLEVELS:MODE PERCENT;
PERCENT 90,10;UNIT 1.000E+00,
0.000E+00;:TELECOMTEST:EYEPATTERN:
VBASE:STATE 1;:TELECOMTEST:
EYEPATTERN:VCROSSING:STATE 1;:
TELECOMTEST:EYEPATTERN:VDARK 1;VTOP:
STATE 1
:TELecomtest:EYEPattern:ALL
Function Turns ON/OFF all eye pattern parameters.
Syntax
:TELecomtest:EYEPattern:ALL {<Boolean>}
Example
:TELECOMTEST:EYEPATTERN:ALL ON
:TELecomtest:EYEPattern:<Parameter>?
Function Queries all settings related to the waveform
parameter of the eye pattern.
Syntax
:TELecomtest:EYEPattern:<Parameter>?
<Parameter> = {DBERate|EHEight|EWIDth|
F
ALL|JITT
er<x>|PCROssing|PDUTycycle|
QFACtor|RISE|SDBase|SDTop|T1CRossing|
T2CRossing|VBASe|VCRossing|VTOP}
<x> = 1 or 2
Example (The following is an example for DBERate.)
:TELECOMTEST:EYEPATTERN:DBERATE?
-> :TELECOMTEST:EYEPATTERN:DBERATE:
STATE 1
Description • For the relationship between communication
commands and parameters used by the DL9040/
DL9140/DL9240, see appendix 4.
• For parameter details, see the DL9040/DL9140/
DL9240 User’s Manual.
:TELecomtest?
Function Queries all settings related to the telecom test.
Syntax
:TELecomtest?
Example
:TELECOMTEST? -> :TELECOMTEST:
CATEGORY MASK;DISPLAY 0;EYEPATTERN:
DBERATE:STATE 0;:TELECOMTEST:
EYEPATTERN:EHEIGHT:STATE 0;:
TELECOMTEST:EYEPATTERN:EWIDTH:
STATE 0;:TELECOMTEST:EYEPATTERN:FALL:
STATE 0;:TELECOMTEST:EYEPATTERN:
JITTER1:STATE 0;:TELECOMTEST:
EYEPATTERN:JITTER2:STATE 1;:
TELECOMTEST:EYEPATTERN:PCROSSING:
STATE 0;:TELECOMTEST:EYEPATTERN:
PDUTYCYCLE:STATE 0;:TELECOMTEST:
EYEPATTERN:QFACTOR:STATE 0;:
TELECOMTEST:EYEPATTERN:RISE:STATE 0;:
TELECOMTEST:EYEPATTERN:SDBASE:STATE 0;:
TELECOMTEST:EYEPATTERN:SDTOP:
STATE 0;:TELECOMTEST:EYEPATTERN:
T1CROSSING:STATE 0;:TELECOMTEST:
EYEPATTERN:T2CROSSING:STATE 0;:
TELECOMTEST:EYEPATTERN:TLEVELS:
MODE PERCENT;PERCENT 90,10;
UNIT 1.000E+00,0.000E+00;:
TELECOMTEST:EYEPATTERN:VBASE:
STATE 0.....
:TELecomtest:CATegory
Function Sets the telecom test type or queries the current
setting.
Syntax
:TELecomtest:CATegory {EYEPattern|MASK}
:TELecomtest:CATegory?
Example
:TELECOMTEST:CATEGORY EYEPATTERN
:TELECOMTEST:CATEGORY? -> :TELECOMTEST:
CATEGORY EYEPATTERN
:TELecomtest:DISPlay
Function Turns ON/OFF the telecom test display or queries the
current setting.
Syntax
:TELecomtest:DISPlay {<Boolean>}
:TELecomtest:DISPlay?
Example
:TELECOMTEST:DISPLAY ON
:TELECOMTEST:DISPLAY? -> :TELECOMTEST:
DISPLAY 1
5.27 TELecomtest Group

YOKOGAWA DL9040 Specifications

General

Brand	YOKOGAWA
Model	DL9040
Category	Test Equipment
Language	English