YOKOGAWA DL9040

5-36
IM 701310-17E
:ANALysis:AHIStogram<x>:MEASure?
Function Queries all settings related automated measurement
of the accumulated histogram.
Syntax
:ANALysis:AHIStogram<x>:MEASure?
<x> = 1 or 2
Example
:ANALYSIS:AHISTOGRAM1:MEASURE? -> :
ANALYSIS:AHISTOGRAM1:MEASURE:CURSOR:
BASIC:C1:STATE 1;:ANALYSIS:AHISTOGRAM1:
MEASURE:CURSOR:BASIC:C2:STATE 1;:
ANALYSIS:AHISTOGRAM1:MEASURE:CURSOR:
BASIC:DC:STATE 1;:ANALYSIS:AHISTOGRAM1:
MEASURE:CURSOR:CALCULATION:
DEFINE1 "C1";DEFINE2 "C2";DEFINE3 "C1";
DEFINE4 "C2";STATE1 1;STATE2 1;
STATE3 1;STATE4 1;:ANALYSIS:
AHISTOGRAM1:MEASURE:CURSOR:HLINKAGE 1;
HPOSITION1 0.000E+00;
HPOSITION2 1.000E+00;VLINKAGE 1;
VPOSITION1 0.000E+00;
VPOSITION2 1.000E+00;:ANALYSIS:
AHISTOGRAM1:MEASURE:MODE CURSOR;
PARAMETER:AREA1:MAXIMUM:STATE 1;:
ANALYSIS:AHISTOGRAM1:MEASURE:PARAMETER:
AREA1:MEAN:STATE 1;:ANALYSIS:
AHISTOGRAM1:MEASURE:PARAMETER:AREA1:
MEDIAN:STATE 1;:ANALYSIS:AHISTOGRAM1:
MEASURE:PARAMETER:AREA1:MINIMUM:
STATE 1;:ANALYSIS:AHISTOGRAM1:MEASURE:
PARAMETER:AREA1:PEAK:STATE 1;:ANALYSIS:
AHISTOGRAM1:MEASURE:PARAMETER:AREA1:
RMS:STATE 1;:ANALYSIS:AHISTOGRAM1:
MEASURE:PARAMETER:AREA1:SD2INTEG:
STATE 1;:ANALYSIS:AHISTOGRAM1:MEASURE:
PARAMETER:AREA1:SD3INTEG:STATE 1;:
ANALYSIS:AHISTOGRAM1:MEASURE:PARAMETER:
AREA1:SDEVIATION:STATE 1;:ANALYSIS:
AHISTOGRAM1:MEASURE:PARAMETER:AREA1:
SDINTEG:STATE 1.....
:ANALysis:AHIStogram<x>:MEASure:
CURSor?
Function Queries all settings related to cursor measurement of
the accumulated histogram.
Syntax
:ANALysis:AHIStogram<x>:MEASure:CURSor?
<x> = 1 or 2
Example
:ANALYSIS:AHISTOGRAM1:MEASURE:CURSOR?
-> :ANALYSIS:AHISTOGRAM1:MEASURE:
CURSOR:BASIC:C1:STATE 1;:ANALYSIS:
AHISTOGRAM1:MEASURE:CURSOR:BASIC:C2:
STATE 1;:ANALYSIS:AHISTOGRAM1:MEASURE:
CURSOR:BASIC:DC:STATE 1;:ANALYSIS:
AHISTOGRAM1:MEASURE:CURSOR:CALCULATION:
DEFINE1 "C1";DEFINE2 "C2";DEFINE3 "C1";
DEFINE4 "C2";STATE1 1;STATE2 1;
STATE3 1;STATE4 1;:ANALYSIS:
AHISTOGRAM1:MEASURE:CURSOR:HLINKAGE 1;
HPOSITION1 0.000E+00;
HPOSITION2 1.000E+00;VLINKAGE 1;
VPOSITION1 0.000E+00;
VPOSITION2 1.000E+00
:ANALysis:AHIStogram<x>:MEASure:
CURSor:BASic?
Function Queries all settings related to basic items of the
cursor of the accumulated histogram.
Syntax
:ANALysis:AHIStogram<x>:MEASure:
CURSor:BASic?
<x> = 1 or 2
Example
:ANALYSIS:AHISTOGRAM1:MEASURE:CURSOR:
BASIC? -> :ANALYSIS:AHISTOGRAM1:
MEASURE:CURSOR:BASIC:C1:STATE 1;:
ANALYSIS:AHISTOGRAM1:MEASURE:CURSOR:
BASIC:C2:STATE 1;:ANALYSIS:AHISTOGRAM1:
MEASURE:CURSOR:BASIC:DC:STATE 1
:ANALysis:AHIStogram<x>:MEASure:
CURSor[:BASic]:ALL
Function Turns ON/OFF all basic items of the cursor of the
accumulated histogram.
Syntax
:ANALysis:AHIStogram<x>:MEASure:
CURSor[:BASic]:ALL {<Boolean>}
<x> = 1 or 2
Example
:ANALYSIS:AHISTOGRAM1:MEASURE:CURSOR:
BASIC:ALL ON
5.3 ANALysis Group