YOKOGAWA DL9040 User Manual

5-80
IM 701310-17E
:CURSor:VERTical:CALCulation:
DEFine<x>
Function Sets the equation of the calculation item of the
vertical cursor or queries the current setting.
Syntax
:CURSor:VERTical:CALCulation:DEFine<x>
{<String>}
:CURSor:VERTical:CALCulation:DEFine<x>?
<x> = 1 to 4
<String> = Up to 128 characters
Example
:CURSOR:VERTICAL:CALCULATION:
DEFINE1 "T1"
:CURSOR:VERTICAL:CALCULATION:DEFINE1?
-> :CURSOR:VERTICAL:CALCULATION:
DEFINE1 "T1"
:CURSor:VERTical:CALCulation:
STATe<x>
Function Turns ON/OFF the calculation item of the vertical
cursor or queries the current setting.
Syntax
:CURSor:VERTical:CALCulation:STATe<x>
{<Boolean>}
:CURSor:VERTical:CALCulation:STATe<x>?
<x> = 1 to 4
Example
:CURSOR:VERTICAL:CALCULATION:STATE1 ON
:CURSOR:VERTICAL:CALCULATION:STATE1?
-> :CURSOR:VERTICAL:CALCULATION:
STATE1 1
:CURSor:VERTical:CALCulation:
VALue<x>?
Function Queries the measured value of the calculation item of
the vertical cursor.
Syntax
:CURSor:VERTical:CALCulation:VALue<x>?
<x> = 1 to 4
Example
:CURSOR:VERTICAL:CALCULATION:VALUE1?
-> :CURSOR:VERTICAL:CALCULATION:
VALUE1 0.000E+00
:CURSor:VT?
Function Queries all settings related to the VT cursor.
Syntax
:CURSor:VT?
Example
:CURSOR:VT? -> :CURSOR:VT:BASIC:
POSITION 0.000E+00;T:
STATE 1;:CURSOR:VT:BASIC:V1:STATE 1;:
CURSOR:VT:BASIC:V2:STATE 1;:CURSOR:VT:
BASIC:V3:STATE 1;:CURSOR:VT:BASIC:V4:
STATE 1;:CURSOR:VT:BASIC:V5:STATE 1;:
CURSOR:VT:BASIC:V6:STATE 1;:CURSOR:VT:
BASIC:V7:STATE 1;:CURSOR:VT:BASIC:V8:
STATE 1;:CURSOR:VT:CALCULATION:
DEFINE1 "T1";DEFINE2 "V(C1)";
DEFINE3 "V(C2)";DEFINE4 "V(C3)";
STATE1 0;STATE2 0;STATE3 0;STATE4 0
:CURSor:VT:BASic?
Function Queries all settings related to basic items of the VT
cursor.
Syntax
:CURSor:VT:BASic?
Example
:CURSOR:VT:BASIC? -> :CURSOR:VT:BASIC:
POSITION 0.000E+00;T:
STATE 1;:CURSOR:VT:BASIC:V1:STATE 1;:
CURSOR:VT:BASIC:V2:STATE 1;:CURSOR:VT:
BASIC:V3:STATE 1;:CURSOR:VT:BASIC:V4:
STATE 1;:CURSOR:VT:BASIC:V5:STATE 1;:
CURSOR:VT:BASIC:V6:STATE 1;:CURSOR:VT:
BASIC:V7:STATE 1;:CURSOR:VT:BASIC:V8:
STATE 1
:CURSor:VT[:BASic]:ALL
Function Turns ON/OFF all basic items of the VT cursor.
Syntax
:CURSor:VT[:BASic]:ALL {<Boolean>}
Example
:CURSOR:VT:BASIC:ALL ON
:CURSor:VT[:BASic]:POSition
Function Sets the VT cursor position or queries the current
setting.
Syntax
:CURSor:VT[:BASic]:POSition {<NRf>}
:CURSor:VT[:BASic]:POSition?
<NRf> = –5 to 5 (div)
Example
:CURSOR:VT:BASIC:POSITION 1
:CURSOR:VT:BASIC:POSITION? -> :CURSOR:
VT:BASIC:POSITION 1.000E+00
:CURSor:VT[:BASic]:T?
Function Queries all settings related to the time value of the VT
cursor.
Syntax
:CURSor:VT[:BASic]:T?
Example
:CURSOR:VT:BASIC:T? -> :CURSOR:VT:
BASIC:T:STATE 1
:CURSor:VT[:BASic]:T:STATe
Function Turns ON/OFF the time value of the VT cursor or
queries the current setting.
Syntax
:CURSor:VT[:BASic]:T:STATe {<Boolean>}
:CURSor:VT[:BASic]:T:STATe?
Example
:CURSOR:VT:BASIC:T:STATE ON
:CURSOR:VT:BASIC:T:STATE? -> :CURSOR:
VT:BASIC:T:STATE 1
:CURSor:VT[:BASic]:T:VALue?
Function Queries the time value at the VT cursor.
Syntax
:CURSor:VT[:BASic]:T:VALue?
Example
:CURSOR:VT:BASIC:T:VALUE? -> :CURSOR:
VT:BASIC:T:VALUE 0.000E+00
5.9 CURSor Group

YOKOGAWA DL9040 Specifications

General

Brand	YOKOGAWA
Model	DL9040
Category	Test Equipment
Language	English