YOKOGAWA DL9040

5-99
IM 701310-17E
Commands
1
2
3
4
5
6
App
Index
:GONogo:ZPARameter:SELect<x>:WAVE:
EDIT<x>:EXIT
Function Exits the edit menu of the wave determination zone.
Syntax
:GONogo:ZPARameter:SELect<x>:WAVE:
EDIT<x>:EXIT {<NRf>|QUIT}
<x> of SELect<x> = 1 to 4
<x> of EDIT<x> = 1 to13 (1 to 8 are traces and 9 to
13 are internal memories)
<NRf> = 1 to 4 (internal memories)
Example
:GONOGO:ZPARAMETER:SELECT1:WAVE:EDIT1:
EXIT 1
Description • An error occurs if this command is issued when the
zone is not being edited.
• Saves the zone waveform to the internal memory
specified by <NRf>.
:GONogo:ZPARameter:SELect<x>:WAVE:
EDIT<x>:PART
Function Editing the portion of the zone of the wave
determination.
Syntax
:GONogo:ZPARameter:SELect<x>:WAVE:
EDIT<x>:PART {<NRf>,<NRf>,<NRf>,<NRf>}
<x> of SELect<x> = 1 to 4
<x> of EDIT<x> = 1 to13 (1 to 8 are traces. 9 to 12
are internal memories. 13 is the zone waveform that
is currently displayed)
<NRf> = –5 to 5 (div: partial editing time axis cursor 1
and 2)
–8 to 8 (div: up and down) (in the order
partialeditingtimeaxiscursor1,2,↑,and↓)
Example
:GONOGO:ZPARAMETER:SELECT1:WAVE:EDIT1:
PART 1,2,3,4
Description The amount of movement upward or downward is a
relative value with respect to the zone waveform that
is currently displayed.
:GONogo:ZPARameter:SELect<x>:WAVE:
EDIT<x>:WHOLe
Function Sets the editing of the entire zone of the waveform
zone.
Syntax
:GONogo:ZPARameter:SELect<x>:WAVE:
EDIT<x>:WHOLe {<NRf>,<NRf>,<NRf>,<NRf>}
<x> of SELect<x> = 1 to 4
<x> of EDIT<x> = 1 to13 (1 to 8 are traces. 9 to 12
are internal memories. 13 is the zone waveform that
is currently displayed)
<NRf> = 0 to 5 (div: left and right)
0 to 8 (div: up and down)
  (Intheorder←,→,↑,and↓)
Example
:GONOGO:ZPARAMETER:SELECT1:WAVE:EDIT1:
WHOLE 1,2,3,4
Description The amount of movement is a relative value with
respect to the reference waveform.
:GONogo:ZPARameter:SELect<x>:WAVE:
TRANge
Function Sets the determination range of the zone
determination or queries the current setting.
Syntax
:GONogo:ZPARameter:SELect<x>:WAVE:
TRANge {<NRf>,<NRf>}
:GONogo:ZPARameter:SELect<x>:WAVE:
TRANge?
<x> = 1 to 4
<NRf> = –5 to 5 (div)
Example
:GONOGO:ZPARAMETER:SELECT1:WAVE:
TRANGE 1,2
:GONOGO:ZPARAMETER:SELECT1:WAVE:TRANGE?
-> :GONOGO:ZPARAMETER:SELECT1:WAVE:
TRANGE 2.000E+00,1.000E+00
:GONogo:ZPARameter:SELect<x>:WINDow
Function Sets the source window of the zone determination or
queries the current setting.
Syntax
:GONogo:ZPARameter:SELect<x>:WINDow
{MAIN|XY1|XY2|Z1|Z2}
:GONogo:ZPARameter:SELect<x>:WINDow?
<x> = 1 to 4
Example
:GONOGO:ZPARAMETER:SELECT1:WINDOW MAIN
:GONOGO:ZPARAMETER:SELECT1:WINDOW?
-> :GONOGO:ZPARAMETER:SELECT1:
WINDOW MAIN
5.12 GONogo Group