YOKOGAWA DL9040 User Manual

5-146
IM 701310-17E
:TELecomtest:MASK:ELEMent<x>:PWCount:
STATe
Function Turns ON/OFF the measurement of the error rate for
the acquisition count of the element or queries the
current setting.
Syntax
:TELecomtest:MASK:ELEMent<x>:PWCount:
STATe {<Boolean>}
:TELecomtest:MASK:ELEMent<x>:PWCount:
STATe?
<x> = 1 to 4
Example
:TELECOMTEST:MASK:ELEMENT1:PWCOUNT:
STATE ON
:TELECOMTEST:MASK:ELEMENT1:PWCOUNT:
STATE? -> :TELECOMTEST:MASK:ELEMENT1:
PWCOUNT:STATE 1
:TELecomtest:MASK:ELEMent<x>:PWCount:
VALue?
Function Queries the error rate for the acquisition count of the
element.
Syntax
:TELecomtest:MASK:ELEMent<x>:PWCount:
VALue?
<x> = 1 to 4
Example
:TELECOMTEST:MASK:ELEMENT1:PWCOUNT:
VALUE? -> :TELECOMTEST:MASK:ELEMENT1:
PWCOUNT:VALUE 1.000E+00
:TELecomtest:MASK:ELEMent<x>:SPCount?
(Sample Point Count)
Function Queries the settings related to the number of sampled
data points for the element that results in error.
Syntax
:TELecomtest:MASK:ELEMent<x>:SPCount?
<x> = 1 to 4
Example
:TELECOMTEST:MASK:ELEMENT1:SPCOUNT?
-> :TELECOMTEST:MASK:ELEMENT1:SPCOUNT:
STATE 1
:TELecomtest:MASK:ELEMent<x>:
SPCount:STATe
Function Turns ON/OFF the measurement of the number of
sampled data points for the element that results in
error or queries the current setting.
Syntax
:TELecomtest:MASK:ELEMent<x>:SPCount:
STATe {<Boolean>}
:TELecomtest:MASK:ELEMent<x>:SPCount:
STATe?
<x> = 1 to 4
Example
:TELECOMTEST:MASK:ELEMENT1:SPCOUNT:
STATE ON
:TELECOMTEST:MASK:ELEMENT1:SPCOUNT:
STATE? -> :TELECOMTEST:MASK:ELEMENT1:
SPCOUNT:STATE 1
:TELecomtest:MASK:ELEMent<x>:SPCount:
VALue?
Function Queries the number of sampled data points for the
element that resulted in error.
Syntax
:TELecomtest:MASK:ELEMent<x>:SPCount:
VALue?
<x> = 1 to 4
Example
:TELECOMTEST:MASK:ELEMENT1:SPCOUNT:
VALUE? -> :TELECOMTEST:MASK:ELEMENT1:
SPCOUNT:VALUE 1
:TELecomtest:MASK:ELEMent<x>:WCOunt?
(Wave Count)
Function Queries the settings related to the acquisition count
for the element that results in error.
Syntax
:TELecomtest:MASK:ELEMent<x>:WCOunt?
<x> = 1 to 4
Example
:TELECOMTEST:MASK:ELEMENT1:WCOUNT?
-> :TELECOMTEST:MASK:ELEMENT1:WCOUNT:
STATE 1
:TELecomtest:MASK:ELEMent<x>:WCOunt:
STATe
Function Turns ON/OFF the measurement of the acquisition
count for the element that results in error or queries
the current setting.
Syntax
:TELecomtest:MASK:ELEMent<x>:WCOunt:
STATe {<Boolean>}
:TELecomtest:MASK:ELEMent<x>:WCOunt:
STATe?
<x> = 1 to 4
Example
:TELECOMTEST:MASK:ELEMENT1:WCOUNT:
STATE ON
:TELECOMTEST:MASK:ELEMENT1:WCOUNT:
STATE? -> :TELECOMTEST:MASK:ELEMENT1:
WCOUNT:STATE 1
:TELecomtest:MASK:ELEMent<x>:WCOunt:
VALue?
Function Queries the acquisition count for the element that
resulted in error.
Syntax
:TELecomtest:MASK:ELEMent<x>:WCOunt:
VALue?
<x> = 1 to 4
Example
:TELECOMTEST:MASK:ELEMENT1:WCOUNT:
VALUE? -> :TELECOMTEST:MASK:ELEMENT1:
WCOUNT:VALUE 1
5.27 TELecomtest Group

YOKOGAWA DL9040 Specifications

General

Brand	YOKOGAWA
Model	DL9040
Category	Test Equipment
Language	English