YOKOGAWA DL9040 User Manual

5-150
IM 701310-17E
:TRIGger:ACTion:MAIL:INTerval
Function Sets the interval at which to send mail when an action
is activated or queries the current setting.
Syntax
:TRIGger:ACTion:MAIL:INTerval
{OFF|<NRf>}
:TRIGger:ACTion:MAIL:INTerval?
<NRf> = 1 to 1440 (min)
Example
:TRIGGER:ACTION:MAIL:INTERVAL 10
:TRIGGER:ACTION:MAIL:INTERVAL?
-> :TRIGGER:ACTION:MAIL:INTERVAL 10
:TRIGger:ACTion:MAIL:MODE
Function Sets whether to send mail when an action is activated
or queries the current setting.
Syntax
:TRIGger:ACTion:MAIL:MODE {<Boolean>}
:TRIGger:ACTion:MAIL:MODE?
Example
:TRIGGER:ACTION:MAIL:MODE ON:TRIGGER:
ACTION:MAIL:MODE? -> :TRIGGER:ACTION:
MAIL:MODE 1
:TRIGger:ACTion:MODE
Function Sets the action-on-trigger mode or queries the current
setting.
Syntax
:TRIGger:ACTion:MODE {ACONdition|OFF}
:TRIGger:ACTion:MODE?
Example
:TRIGGER:ACTION:MODE ACONDITION
:TRIGGER:ACTION:MODE? -> :TRIGGER:
ACTION:MODE ACONDITION
:TRIGger:ACTion:SAVE
Function Sets whether to save the waveform data to the
storage medium (ON/OFF) when an action is
activated or queries the current setting.
Syntax
:TRIGger:ACTion:SAVE {<Boolean>}
:TRIGger:ACTion:SAVE?
Example
:TRIGGER:ACTION:SAVE ON
:TRIGGER:ACTION:SAVE? -> :TRIGGER:
ACTION:SAVE 1
:TRIGger:ACTion:STARt
Function Starts the action-on-trigger.
Syntax
:TRIGger:ACTion:STARt
Example
:TRIGGER:ACTION:START
:TRIGger:ACTion:STOP
Function Stops the action-on-trigger.
Syntax
:TRIGger:ACTion:STOP
Example
:TRIGGER:ACTION:STOP
:TRIGger:CLOCk?
Function Queries all settings related to the clock channel.
Syntax
:TRIGger:CLOCk?
Example
:TRIGGER:CLOCK? -> :TRIGGER:CLOCK:
SOURCE 1;POLARITY RISE
:TRIGger:CLOCk:POLarity
Function Sets the polarity of the clock channel or queries the
current setting.
Syntax
:TRIGger:CLOCk:POLarity {ENTer|EXIT|
FALL|RISE}
:TRIGger:CLOCk:POLarity?
Example
:TRIGGER:CLOCK:POLARITY RISE
:TRIGGER:CLOCK:POLARITY? -> :TRIGGER:
CLOCK:POLARITY RISE
Description • This command is invalid when
:TRIGger:CLOCk:
SOURce NONE
.
• {ENTer|EXIT} is valid when
:TRIGger:SOURce:
CHANnel<x>:WINDow ON
. For all other cases,
{FALL|RISE} is valid.
•
This command is valid when
:TRIGger:TYPE
PSTAte|STATe
.
:TRIGger:CLOCk:SOURce
Function Sets the source waveform of the clock channel or
queries the current setting.
Syntax
:TRIGger:CLOCk:SOURce {<NRf>|NONE}
:TRIGger:CLOCk:SOURce?
<NRf> = 1 to 4
Example
:TRIGGER:CLOCK:SOURCE NONE
:TRIGGER:CLOCK:SOURCE? -> :TRIGGER:
CLOCK:SOURCE NONE
Description This command is valid when
:TRIGger:TYPE
PSTAte|STATe
.
:TRIGger:DELay?
Function Queries all settings related to the trigger delay.
Syntax
:TRIGger:DELay?
Example
:TRIGGER:DELAY? -> :TRIGGER:DELAY:
EDGECOUNT:COUNT 1;:
TRIGGER:DELAY:MODE 1;POLARITY FALL;
SOURCE 4;TIME 1.000E+00;TYPE EDGECOUNT
:TRIGger:DELay:EDGecount?
Function Queries all settings related to edge count of the
trigger delay.
Syntax
:TRIGger:DELay:EDGecount?
Example
:TRIGGER:DELAY:EDGECOUNT? -> :TRIGGER:
DELAY:EDGECOUNT:COUNT 1
:TRIGger:DELay:EDGecount:COUNt
Function Sets the edge count value of the trigger delay or
queries the current setting.
Syntax
:TRIGger:DELay:EDGecount:COUNt {<NRf>}
:TRIGger:DELay:EDGecount:COUNt?
<NRf> = 1 to 1000000000
Example
:TRIGGER:DELAY:EDGECOUNT:COUNT 1
:TRIGGER:DELAY:EDGECOUNT:COUNT?
-> :TRIGGER:DELAY:EDGECOUNT:COUNT 1
5.29 TRIGger Group

YOKOGAWA DL9040 Specifications

General

Brand	YOKOGAWA
Model	DL9040
Category	Test Equipment
Language	English