YOKOGAWA DL9040

5-184
IM 701310-17E
:TRIGger:ENHanced:I2CBus:ADATa?
Function Queries all settings related to the address of the I
2
C
bus trigger.
Syntax
:TRIGger:ENHanced:I2CBus:ADATa?
Example
:TRIGGER:ENHANCED:I2CBUS:ADATA?
-> :TRIGGER:ENHANCED:I2CBUS:ADATA:
BIT10ADDRESS:PATTERN "10111011111";:
TRIGGER:ENHANCED:I2CBUS:ADATA:
BIT7ADDRESS:PATTERN "11011110";:
TRIGGER:ENHANCED:I2CBUS:ADATA:
BIT7APSUB:ADDRESS:PATTERN "10101011";:
TRIGGER:ENHANCED:I2CBUS:ADATA:
BIT7APSUB:SADDRESS:PATTERN "10101011";:
TRIGGER:ENHANCED:I2CBUS:ADATA:
TYPE BIT10ADDRESS
:TRIGger:ENHanced:I2CBus:ADATa:
BIT10address?
Function Queries all settings related to the 10-bit address of
the I
2
C bus trigger.
Syntax
:TRIGger:ENHanced:I2CBus:ADATa:
BIT10address?
Example
:TRIGGER:ENHANCED:I2CBUS:ADATA:
BIT10ADDRESS? -> :TRIGGER:ENHANCED:
I2CBUS:ADATA:BIT10ADDRESS:
PATTERN "10111011111"
:TRIGger:ENHanced:I2CBus:ADATa:
BIT10address:HEXA
Function Sets the 10-bit address of the I
2
C bus trigger in
hexadecimal notation.
Syntax
:TRIGger:ENHanced:I2CBus:ADATa:
BIT10address:HEXA {<String>}
<String> = 3 characters by combining ‘0’ to ‘F’
and ‘X’
(bit 8 is the R/W bit)
Example
:TRIGGER:ENHANCED:I2CBUS:ADATA:
BIT10ADDRESS:HEXA "7AB"
:TRIGger:ENHanced:I2CBus:ADATa:
BIT10address:PATTern
Function Sets the 10-bit address of the I
2
C bus trigger in binary
notation or queries the current setting.
Syntax
:TRIGger:ENHanced:I2CBus:ADATa:
BIT10address:PATTern {<String>}
:TRIGger:ENHanced:I2CBus:ADATa:
BIT10address:PATTern?
<String> = 11 characters by combining ‘0’, ‘1’, and ‘X’
(bit 8 is the R/W bit)
Example
:TRIGGER:ENHANCED:I2CBUS:ADATA:
BIT10ADDRESS:PATTERN "10111011111"
:TRIGGER:ENHANCED:I2CBUS:ADATA:
BIT10ADDRESS:PATTERN? -> :TRIGGER:
ENHANCED:I2CBUS:ADATA:
BIT10ADDRESS:PATTERN "10111011111"
:TRIGger:ENHanced:CANBus:SOURce
Function Sets the trigger source of the CAN bus signal trigger
or queries the current setting.
Syntax
:TRIGger:ENHanced:CANBus:SOURce
{<NRf>}
:TRIGger:ENHanced:CANBus:SOURce?
<NRf> = 1 to 4
Example
:TRIGGER:ENHANCED:CANBUS:SOURCE 1
:TRIGGER:ENHANCED:CANBUS:SOURCE?
-> :TRIGGER:ENHANCED:CANBUS:SOURCE 1
:TRIGger:ENHanced:CANBus:SPOint
Function Sets the sample point of the CAN bus signal trigger
or queries the current setting.
Syntax
:TRIGger:ENHanced:CANBus:SPOint
{<NRf>}
:TRIGger:ENHanced:CANBus:SPOint?
<NRf> = 18.8 to 90.6(%)
Example
:TRIGGER:ENHANCED:CANBUS:SPOINT 18.8
:TRIGGER:ENHANCED:CANBUS:
SPOINT? -> :TRIGGER:ENHANCED:CANBUS:
SPOINT 18.8E+00
:TRIGger:ENHanced:I2CBus?
Function Queries all settings related to the I
2
C bus trigger.
Syntax
:TRIGger:ENHanced:I2CBus?
Example
:TRIGGER:ENHANCED:I2CBUS? -> :TRIGGER:
ENHANCED:I2CBUS:ADATA:
BIT10ADDRESS:PATTERN "10111011111";:
TRIGGER:ENHANCED:I2CBUS:ADATA:
BIT7ADDRESS:PATTERN "11011110";:
TRIGGER:ENHANCED:I2CBUS:ADATA:
BIT7APSUB:ADDRESS:PATTERN "10101011";:
TRIGGER:ENHANCED:I2CBUS:ADATA:
BIT7APSUB:SADDRESS:PATTERN "10101011";:
TRIGGER:ENHANCED:I2CBUS:ADATA:
TYPE BIT10ADDRESS;:TRIGGER:ENHANCED:
I2CBUS:CLOCK:SOURCE 1;:TRIGGER:
ENHANCED:I2CBUS:DATA:BYTE 1;
CONDITION TRUE;DPOSITION 1;MODE 1;
PATTERN1 "10101011";
PATTERN2 "10101010";
PATTERN3 "10101111";
PATTERN4 "10101011";PMODE DONTCARE;
SOURCE 1;:TRIGGER:ENHANCED:I2CBUS:
GCALL:BIT7MADDRESS:PATTERN "1010101";:
TRIGGER:ENHANCED:I2CBUS:GCALL:
SBYTE BIT7MADDRESS;:TRIGGER:ENHANCED:
I2CBUS:MODE ADATA;NAIGNORE:HSMODE 1;
RACCESS 1;SBYTE 1;:TRIGGER:ENHANCED:
I2CBUS:SBHSMODE:TYPE HSMODE
5.29 TRIGger Group