YOKOGAWA DL9040

5-203
IM 701310-17E
Commands
1
2
3
4
5
6
App
Index
5.31 ZOOM Group
:ZOOM:HORizontal<x>:ASCRoll:STARt
Function Starts auto scrolling.
Syntax
:ZOOM:HORizontal<x>:ASCRoll:STARt
{LEFT|RIGHt}
<x> = 1 or 2
Example
:ZOOM:HORIZONTAL1:ASCROLL:START LEFT
:ZOOM:HORizontal<x>:ASCRoll:STOP
Function Stops auto scrolling.
Syntax
:ZOOM:HORizontal<x>:ASCRoll:STOP
<x> = 1 or 2
Example
:ZOOM:HORIZONTAL1:ASCROLL:STOP
:ZOOM:HORizontal<x>:MAG
Function Sets the horizontal zoom magnification or queries the
current setting.
Syntax
:ZOOM:HORizontal<x>:MAG {<NRf>}
:ZOOM:HORizontal<x>:MAG?
<x> = 1 or 2
<NRf> = See the DL9000 User
’s Manual.
Example
:ZOOM:HORIZONTAL1:MAG 2
:ZOOM:HORIZONTAL1:MAG? -> :ZOOM:
HORIZONTAL1:MAG 2.000E+00
:ZOOM:HORizontal<x>:POSition
Function Sets the horizontal zoom center position or queries
the current setting.
Syntax
:ZOOM:HORizontal<x>:POSition {<NRf>}
:ZOOM:HORizontal<x>:POSition?
<x> = 1 or 2
<NRf> = –5 to 5 (div)
Example
:ZOOM:HORIZONTAL1:POSITION 1
:ZOOM:HORIZONTAL1:POSITION? -> :ZOOM:
HORIZONTAL1:POSITION 1.000E+00
:ZOOM:MODE
Function Sets the zoom waveform display format or queries
the current setting.
Syntax
:ZOOM:MODE {MAIN|MAIN_Z1|MAIN_Z1_Z2|
MAIN_Z2|Z1|Z1_Z2|Z2}
:ZOOM:MODE?
Example
:ZOOM:MODE MAIN_Z1_Z2
:ZOOM:MODE? -> :ZOOM:MODE MAIN_Z1_Z2
:ZOOM:TYPE<x>
Function Sets the zoom type or queries the current setting.
Syntax
:ZOOM:TYPE<x> {HORizontal|VERTical}
:ZOOM:TYPE<x>?
<x> = 1 or 2
Example
:ZOOM:TYPE1 VERTICAL
:ZOOM:TYPE1? -> :ZOOM:TYPE1 VERTICAL
:ZOOM:VERTical<x>?
Function Queries all settings related to the vertical zoom.
Syntax
:ZOOM:VERTical<x>?
<x> = 1 or 2
Example
:ZOOM:VERTICAL1? -> :ZOOM:VERTICAL1:
MAG 1.000E+00;POSITION 0.000E+00;
TRACE 1
:ZOOM:VERTical<x>:INITialize
Function Initializes the vertical zoom.
Syntax
:ZOOM:VERTical<x>:INITialize
<x> = 1 or 2
Example
:ZOOM:VERTICAL1:INITIALIZE
:ZOOM:VERTical<x>:MAG
Function Sets the vertical zoom magnification or queries the
current setting.
Syntax
:ZOOM:VERTical<x>:MAG {<NRf>}
:ZOOM:VERTical<x>:MAG?
<x> = 1 or 2
<NRf> = See the DL9000 User
’s Manual.
Example
:ZOOM:VERTICAL1:MAG 1
:
ZOOM:VERTICAL1:MAG? -> :ZOOM:VERTICAL1:
MAG 1.000E+00
:ZOOM:VERTical<x>:POSition
Function Sets the vertical zoom position or queries the current
setting.
Syntax
:ZOOM:VERTical<x>:POSition {<NRf>}
:ZOOM:VERTical<x>:POSition?
<x> = 1 or 2
<NRf> = –4 to 4 (div)
Example
:ZOOM:VERTICAL1:POSITION 1
:ZOOM:VERTICAL1:POSITION? -> :ZOOM:
VERTICAL1:POSITION 1.000E+00
:ZOOM:VERTical<x>:TRACe
Function Sets the trace you wish to display on the vertical
zoom screen or queries the current setting.
Syntax
:ZOOM:VERTical<x>:TRACe {<NRf>}
:ZOOM:VERTical<x>:TRACe?
<x> = 1 or 2
<NRf> = 1 to 8
Example
:ZOOM:VERTICAL1:TRACE 1
:ZOOM:VERTICAL1:TRACE? -> :ZOOM:
VERTICAL1:TRACE 1
:ZOOM:VLINkage
Function Turns ON/OFF the vertical link or queries the current
setting.
Syntax
:ZOOM:VLINkage {<Boolean>}
:ZOOM:VLINkage?
Example
:ZOOM:VLINkAGE ON
:ZOOM:VLINkAGE? -> :ZOOM:VLINkAGE 1