The figure below is provided to familiarize the first-time user with the general workflow of
the DL9000. For a description of each item, see the relevant chapter or section.
Measurement Preparation
Display waveforms on the screen
Waveform Display Conditions
Install the DL9000
Connect the power supply
and turn it ON/OFF
Connect probes
Initialization
Auto setup
• Vertical axis
• Horizontal (time) axis
• Triggering
• Acquire waveforms
(including GO/NO-GO)
• Display waveforms and information
Waveform Computation, Analysis, and Search
• Compute waveforms
• Analyze waveforms
• Search waveforms
Waveform Printing and Storage
• Print the display image
• Save various types of data
Section 3.2
Section 3.3
Sections 3.4 and 3.5
Section 4.4
Section 4.5
Sections 5.2 to 5.7 and 5.9 to 5.11
Section 5.8
Chapter 6
Chapter 7
Chapter 8
Chapter 9
Chapter 10
Chapters 10 and 11
Chapter 12
Chapter 13
To Next Page
Loading...
