YOKOGAWA DLM2000 Series - Page 144

5-111
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
:HCOPy:MULTitarget:FILE
Function Sets or queries whether the multi target feature
will send output to a file.
Syntax
:HCOPy:MULTitarget:FILE {<Boolean>}:H
COPy:MULTitarget:FILE?
Example
:HCOPY:MULTITARGET:FILE ON:HCOPY:MULT
ITARGET:FILE?
-> :HCOPY:MULTITARGET:FILE 1
:HCOPy:MULTitarget:WAVeform
Function Sets or queries whether the multi target feature
will send output to a waveform file.
Syntax
:HCOPy:MULTitarget:WAVeform {<Boolean
>}:HCOPy:MULTitarget:WAVeform?
Example
:HCOPY:MULTITARGET:WAVEFORM ON:HCOPY:
MULTITARGET:WAVEFORM?
-> :HCOPY:MULTITARGET:WAVEFORM 1
:HCOPy:NETPrint?
Function Queries all network printer output settings.
Syntax
:HCOPy:NETPrint?
Description You can use this command when the optional
Ethernet interface is installed.
:HCOPy:NETPrint:MODE
Function Sets or queries whether the DLM2000 will print to
the network printer in normal copy or hard copy
mode.
Syntax
:HCOPy:NETPrint:MODE {HARD|NORMal}
:HCOPy:NETPrint:MODE?
Example
:HCOPY:NETPRINT:MODE HARD
:HCOPY:NETPRINT:MODE?
-> :HCOPY:NETPRINT:MODE HARD
Description You can use this command when the optional
Ethernet interface is installed.
:HCOPy:NETPrint:TONE
Function Sets or queries the network printer output color
setting.
Syntax
:HCOPy:NETPrint:TONE {<Boolean>}
:HCOPy:NETPrint:TONE?
Example
:HCOPY:NETPRINT:TONE ON
:HCOPY:NETPRINT:TONE?
-> :HCOPY:NETPRINT:TONE 1
Description You can use this command when the optional
Ethernet interface is installed.
:HCOPy:NETPrint:TYPE
Function Sets or queries the network printer output
command type.
Syntax
:HCOPy:NETPrint:TYPE {EINKjet|HINKjet
|HLASer}
:HCOPy:NETPrint:TYPE?
Example
:HCOPY:NETPRINT:TYPE EINKJET
:HCOPY:NETPRINT:TYPE?
-> :HCOPY:NETPRINT:TYPE EINKJET
Description You can use this command when the optional
Ethernet interface is installed.
:HCOPy:PRINter?
Function Queries all built-in printer output settings.
Syntax
:HCOPy:PRINter?
:HCOPy:PRINter:MAG
Function Sets or queries the magnification used when the
DLM2000 prints to the built-in printer in long copy
mode.
Syntax
:HCOPy:PRINter:MAG {<NRf>}
:HCOPy:PRINter:MAG?
<NRf> = 2 to 10
Example
:HCOPY:PRINTER:MAG 2
:HCOPY:PRINTER:MAG?
-> :HCOPY:PRINTER:MAG 2.000E+00
:HCOPy:PRINter:MODE
Function Sets or queries whether the DLM2000 will print
to the built-in printer in short, long, or hard copy
mode.
Syntax
:HCOPy:PRINter:MODE {HARD|LONG|SHORt}
:HCOPy:PRINter:MODE?
Example
:HCOPY:PRINTER:MODE HARD
:HCOPY:PRINTER:MODE?
-> :HCOPY:PRINTER:MODE HARD
:HCOPy:PRINter:RANGe
Function Sets or queries the source window used when the
DLM2000 prints to the built-in printer in long copy
mode.
Syntax
:HCOPy:PRINter:RANGe {MAIN|Z1|Z2}
:HCOPy:PRINter:RANGe?
Example
:HCOPY:PRINTER:RANGE MAIN
:HCOPY:PRINTER:RANGE?
-> :HCOPY:PRINTER:RANGE MAIN
:HCOPy:PRINter:REPort
Function Sets or queries whether the DLM2000 will print
additional information on the built-in printer.
Syntax
:HCOPy:PRINter:REPort {<Boolean>}
:HCOPy:PRINter:REPort?
Example
:HCOPY:PRINTER:REPORT ON
:HCOPY:PRINTER:REPORT?
-> :HCOPY:PRINTER:REPORT 1
:HCOPy:PRINter:TRANge
Function Sets or queries the output range used when the
DLM2000 prints to the built-in printer in long copy
mode.
Syntax
:HCOPy:PRINter:TRANge {<NRf>,<NRf>}
:HCOPy:PRINter:TRANge?
 <NRf>=−5to5(instepsof10divisions/display
record length)
Example
:HCOPY:PRINTER:TRANGE−5
:HCOPY:PRINTER:TRANGE?
-> :HCOPY:PRINTER:TRANGE−5
5.14 HCOPy Group