YOKOGAWA DLM2000 Series User Manual

5-152
IM 710105-17E
5.24 SERialbus Group
The following table indicates how the communication commands for serial bus types correspond to the menu items
that appear on the screen.
Serial Bus Type Communication
Command
Setup Menu
Serial Bus Menu Serial Bus Type
CAN bus signal CAN* SERIAL BUS CAN
CAN FD bus signal CANFD* CAN FD
LIN bus signal LIN* LIN
SENT signal SENT* SENT
PSI5 signal PSI5* PSI5 Airbag
UART signal UART* UART
I2C bus signal I2C* I2C
SPI bus signal SPI* SPI
FlexRay bus signal
FLEXray*
FlexRay
User-defined serial bus signal SPATtern User Define
* CAN, CANFD, LIN, SENT, PSI5, UART, I2C, SPI, and FLEXray are serial bus options available only for
4-channel models. Communication commands for these serial buses cannot be used on 2-channel models or
4-channel models without serial bus options.
:SERialbus<x>:CAN[:ANALyze]:SETup:BR
ATe
Function Sets or queries the CAN bus signal analysis bit
rate (data transfer rate).
Syntax
:SERialbus<x>:CAN[:ANALyze]:SETup:BRA
Te {<NRf>|USER,<NRf>}
:SERialbus<x>:CAN[:ANALyze]:SETup:BRA
Te?
<x> = 1 to 4
<NRf> = 33300, 83300, 125000, 250000, 500000,
1000000
USER <NRf> = See the DLM2000 Features Guide
for this information.
Example
:SERIALBUS1:CAN:ANALYZE:SETUP:BRA
TE 83300
:SERIALBUS1:CAN:ANALYZE:SETUP:BRATE?
-> :SERIALBUS1:CAN:ANALYZE:SETUP:BRA
TE 83300
:SERialbus<x>:CAN[:ANALyze]:SETup:RE
Cessive
Function Sets or queries the CAN bus signal analysis
recessive level.
Syntax
:SERialbus<x>:CAN[:ANALyze]:SETup:REC
essive {HIGH|LOW}
:SERialbus<x>:CAN[:ANALyze]:SETup:REC
essive?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:ANALYZE:SETUP:RECESSI
VE HIGH
:SERIALBUS1:CAN:ANALYZE:SETUP:RECESSI
VE?
-> :SERIALBUS1:CAN:ANALYZE:SETUP:RECE
SSIVE HIGH
:SERialbus<x>?
Function Queries all serial bus signal analysis and search
settings.
Syntax
:SERialbus<x>?
<x> = 1 to 4 (1 only for 2-channel models)
:SERialbus<x>:ASETup:ABORt
Function Aborts auto setup on a serial bus signal.
Syntax
:SERialbus<x>:ASETup:ABORt
<x> = 1 to 4
Example
:SERIALBUS1:ASETUP:ABORT
Description This command cannot be used on the DLM2022,
DLM2032, or DLM2052.
:SERialbus<x>:ASETup:EXECute
Function Executes auto setup on a serial bus signal.
Syntax
:SERialbus<x>:ASETup:EXECute
<x> = 1 to 4
Example
:SERIALBUS1:ASETUP:EXECUTE
Description This command cannot be used on the DLM2022,
DLM2032, or DLM2052.
:SERialbus<x>:CAN?
Function Queries all CAN bus signal settings.
Syntax
:SERialbus<x>:CAN?
<x> = 1 to 4
:SERialbus<x>:CAN:ANALyze?
Function Queries all CAN bus signal analysis settings.
Syntax
:SERialbus<x>:CAN:ANALyze?
<x> = 1 to 4
:SERialbus<x>:CAN[:ANALyze]:SETup?
Function Queries all CAN bus signal analysis bus settings.
Syntax
:SERialbus<x>:CAN[:ANALyze]:SETup?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:ANALYZE:SETUP?
-> :SERIALBUS1:CAN:ANALYZE:SETUP

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English