YOKOGAWA DLM2000 Series - Page 186

5-153
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
:SERialbus<x>:CAN[:ANALyze]:SETup:SO
URce
Function Sets or queries the CAN bus signal analysis
source.
Syntax
:SERialbus<x>:CAN[:ANALyze]:SETup:SOU
Rce {<NRf>|MATH<x>}
:SERialbus<x>:CAN[:ANALyze]:SETup:SOU
Rce?
<x> = 1 to 4
<NRf> = 1 to 4
<x> of MATH<x> = 1 or 2
Example
:SERIALBUS1:CAN:ANALYZE:SETUP:SOUR
CE 1
:SERIALBUS1:CAN:ANALYZE:SETUP:SOURCE?
-> :SERIALBUS1:CAN:ANALYZE:SETUP:SOUR
CE 1
:SERialbus<x>:CAN[:ANALyze]:SETup:SP
Oint
Function Sets or queries the CAN bus signal analysis
sample point.
Syntax
:SERialbus<x>:CAN[:ANALyze]:SETup:SPO
int {<NRf>}
:SERialbus<x>:CAN[:ANALyze]:SETup:SPO
int?
<x> = 1 to 4
<NRf> = 18.8 to 90.6
Example
:SERIALBUS1:CAN:ANALYZE:SETUP:SPOI
NT 18.8
:SERIALBUS1:CAN:ANALYZE:SETUP:SPOINT?
-> :SERIALBUS1:CAN:ANALYZE:SETUP:SPOI
NT 18.8
:SERialbus<x>:CAN:DETail?
Function Queries all CAN bus signal analysis result list
settings.
Syntax
:SERialbus<x>:CAN:DETail?
<x> = 1 to 4
:SERialbus<x>:CAN:DETail:DISPlay
Function Sets or queries the display mode for the CAN bus
signal analysis result list.
Syntax
:SERialbus<x>:CAN:DETail:DISPl
ay {FULL|LOWer|UPPer}
:SERialbus<x>:CAN:DETail:DISPlay?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:DETAIL:DISPLAY FULL
:SERIALBUS1:CAN:DETAIL:DISPLAY?
-> :SERIALBUS1:CAN:DETAIL:DISPLAY FUL
L
:SERialbus<x>:CAN:DETail:LIST:ITEM?
Function Queries all items that will be displayed in the CAN
bus signal analysis result list.
Syntax
:SERialbus<x>:CAN:DETail:LIST:ITEM?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:DETAIL:LIST:ITEM?
-> :SERIALBUS1:CAN:DETAIL:LIST:
ITEM "No.,Time(ms),Frame,ID,DLC,Data,
CRC,Ack,Information"
:SERialbus<x>:CAN:DETail:LIST:VALue?
Function Queries all of the data for the specified analysis
number in the CAN bus signal analysis result list.
Syntax
:SERialbus<x>:CAN:DETail:LIST:
VALue? {<NRf>|MAXimum|MINimum}
<x> = 1 to 4
<NRf> = See the DLM2000 Features Guide for
this information.
Example
:SERIALBUS1:CAN:DETAIL:LIST:VALUE? 0
-> :SERIALBUS1:CAN:DETAIL:LIST:
VALUE "0,0.0750,Data,012,1,FE,2263
,Y,,"
:SERialbus<x>:CAN:SEARch?
Function Queries all CAN bus signal search settings.
Syntax
:SERialbus<x>:CAN:SEARch?
<x> = 1 to 4
:SERialbus<x>:CAN:SEARch:ABORt
Function Aborts the CAN bus signal search.
Syntax
:SERialbus<x>:CAN:SEARch:ABORt
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:ABORT
:SERialbus<x>:CAN:SEARch:EXECute
Function Executes a CAN bus signal search.
Syntax
:SERialbus<x>:CAN:SEARch:EXECute
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:EXECUTE
:SERialbus<x>:CAN:SEARch:FJUMp:ACK
Function Jumps to the ACK Field in the CAN bus signal
search result.
Syntax
:SERialbus<x>:CAN:SEARch:FJUMp:ACK
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:FJUMP:ACK
:SERialbus<x>:CAN:SEARch:FJUMp:CONTr
ol
Function Jumps to the Control Field in the CAN bus signal
search result.
Syntax
:SERialbus<x>:CAN:SEARch:FJUMp:CONTr
ol
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:FJUMP:CONTROL
5.24 SERialbus Group