YOKOGAWA DLM2000 Series - 5.12 FILE Group

5-100
IM 710105-17E
:FILE:DELete:{AHIStogram|ASCii|BI
Nary|BMP|FFT|HLISt|JPEG|MEASure|P
NG|SBUS|SETup|SNAP|ZPOLygon|ZWAVe}
[:EXECute]
Function Deletes a specific type of data file. This is an
overlap command.
Syntax
:FILE:DELete:{AHIStogram|ASCii|
BINary|BMP|FFT|HLISt|JPEG|MEASure|
PNG|SBUS|SETup|SNAP|ZPOLygon|ZWAVe}
[:EXECute] {<File name>}
Example (Below is an example for waveform data.)
:FILE:DELETE:AHISTOGRAM:EXECUTE "DATA
"
Description Use the
:FILEDIRectory:DRIVe
command to
select the target medium.
:FILE[:DIRectory]:CDIRectory
Function Changes the current directory.
Syntax
:FILE[:DIRectory]:CDIRectory {<String
>}
<String> =See the DLM2000 Features Guide for
this information.
Example
:FILE:DIRECTORY:CDIRECTORY "UTIL"
:FILE[:DIRectory]:DRIVe
Function Sets the current medium.
Syntax
:FILE[:DIRectory]:DRIVe {FLAShmem|
NETWork|USB,<NRf>}
<NRf> = 0 to 3
Example
:FILE:DIRECTORY:DRIVE FLASHMEM
Description You can omit the <NRf> for USB if the drive is not
partitioned or is not divided into LUNs.
:FILE[:DIRectory]:FREE?
Function Queries the free space on the current medium in
bytes.
Syntax
:FILE[:DIRectory]:FREE?
Example
:FILE:DIRECTORY:FREE?
-> :FILE:DIRECTORY:FREE 65536
:FILE[:DIRectory]:MDIRectory
Function Creates a directory in the current directory. This is
an overlap command.
Syntax
:FILE[:DIRectory]:MDIRectory {<String
>}
<String> = See the DLM2000 Features Guide for
this information.
Example
:FILE:DIRECTORY:MDIRECTORY "DIR2"
5.12 FILE Group
:FILE?
Function Queries all settings for data storage.
Syntax
:FILE?
:FILE:COPY:ABORt
Function Aborts file copying.
Syntax
:FILE:COPY:ABORt
Example
:FILE:COPY:ABORT
:FILE:COPY:CDIRectory
Function Changes the file copy destination directory.
Syntax
:FILE:COPY:CDIRectory {<String>}
<String> = See the DLM2000 Features Guide for
this information.
Example
:FILE:COPY:CDIRECTORY "UTIL"
(relative path designation)
:FILE:COPY:DRIVe
Function Sets the file copy source medium.
Syntax
:FILE:COPY:DRIVe {FLAShmem|USB,<NRf>}
<NRf> = 0 to 3
Example
:FILE:COPY:DRIVE FLASHMEM
Description You can omit the <NRf> for USB if the drive is not
partitioned or is not divided into LUNs.
:FILE:COPY[:EXECute]
Function Executes file copying. This is an overlap
command.
Syntax
:FILE:COPY[:EXECute] {<String>}
<String> = See the DLM2000 Features Guide for
this information.
Example
:FILE:COPY:EXECUTE "DATA.PNG"
:FILE:COPY:PATH?
Function Queries the file copy destination directory.
Syntax
:FILE:COPY:PATH?
Example
:FILE:COPY:PATH?
-> :FILE:COPY:PATH "PATH = FLASHMEM/
UTIL"