YOKOGAWA DLM2000 Series - Wparameter Group

5-282
IM 710105-17E
5.35 WPARameter Group
:WPARameter<x>?
Function Queries all of the settings for the waveform
parameter measurement feature.
Syntax
:WPARameter<x>?
<x> = 1 or 2 (1 only for 2-channel models)
:WPARameter<x>:DISPlay
Function Sets or queries the on/off status of waveform
parameter measurement display.
Syntax
:WPARameter<x>:DISPlay {<Boolean>}
:WPARameter<x>:DISPlay?
<x> = 1 or 2 (1 only for 2-channel models)
Example
:WPARAMETER1:DISPLAY ON
:WPARAMETER1:DISPLAY?
-> :WPARAMETER1:DISPLAY 1
:WPARameter<x>:HISTogram?
Function Queries all histogram display settings for
waveform parameter measurement.
Syntax
:WPARameter<x>:HISTogram?
<x> = 1 or 2 (1 only for 2-channel models)
:WPARameter<x>:HISTogram:MEASure?
Function Queries all automatic measurement settings of
the histogram display for waveform parameter
measurement.
Syntax
:WPARameter<x>:HISTogram:MEASure?
<x> = 1 or 2 (1 only for 2-channel models)
:WPARameter<x>:HISTogram:MEASure:MO
DE
Function Sets or queries the automatic measurement mode
of the histogram display for waveform parameter
measurement.
Syntax
:WPARameter<x>:HISTogram:MEASure:MO
DE {OFF|PARameter}
:WPARameter<x>:HISTogram:MEASure:MO
DE?
<x> = 1 or 2 (1 only for 2-channel models)
Example
:WPARAMETER1:HISTOGRAM:MEASURE:MO
DE OFF
:WPARAMETER1:HISTOGRAM:MEASURE:MODE?
-> :WPARAMETER1:HISTOGRAM:MEASURE:MO
DE OFF
:WPARameter<x>:HISTogram:MEASure:PAR
ameter?
Function Queries all automatic measurement settings of
the histogram parameter for waveform parameter
measurement.
Syntax
:WPARameter<x>:HISTogram:MEASure:PARa
meter?
<x> = 1 or 2 (1 only for 2-channel models)
:WPARameter<x>:HISTogram:MEASure:PAR
ameter:ALL
Function Collectively turns on or off all histogram
parameters for waveform parameter
measurement.
Syntax
:WPARameter<x>:HISTogram:MEASure:PARa
meter:ALL {<Boolean>}
<x> = 1 or 2 (1 only for 2-channel models)
Example
:WPARAMETER1:HISTOGRAM:MEASURE:PARAME
TER:ALL ON
:WPARameter<x>:HISTogram:MEASure:PAR
ameter:<Parameter>?
Function Queries all of the settings of a histogram
parameter for waveform parameter measurement.
Syntax
:WPARameter<x>:HISTogram:MEASure:PARa
meter:<Parameter>?
<x> = 1 or 2 (1 only for 2-channel models)
<Parameter> = {
C1|C2|DC|MAXimum|MEAN|
MEDian|MINimum|PEAK|SD2integ|
SD3integ|SDEViation|SDINteg
}