YOKOGAWA DLM2000 Series - ZOOM Group

5-289
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
5.37 ZOOM Group
:ZOOM<x>:MAG
Function Sets or queries the magnification of a zoom
waveform display.
Syntax
:ZOOM<x>:MAG {<NRf>}
:ZOOM<x>:MAG?
<x> = 1 or 2
<NRf> = See the DLM2000 Feature Guide for this
information.
Example
:ZOOM1:MAG 2.5
:ZOOM1:MAG?
-> :ZOOM1:MAG 2.5
:ZOOM<x>:MAGFine
Function Sets or queries the magnification (Fine) of a zoom
waveform display.
Syntax
:ZOOM<x>:MAGFine {<NRf>}
:ZOOM<x>:MAGFine?
<x> = 1 or 2
<NRf> = See the DLM2000 Feature Guide for this
information.
Example
:ZOOM1:MAGFINE 2.5
:ZOOM1:MAGFINE?
-> :ZOOM1:MAGFINE 2.5
:ZOOM<x>:MAIN
Function Sets or queries the display ratio of a zoom
waveform display.
Syntax
:ZOOM<x>:MAIN {20|50|OFF}
:ZOOM<x>:MAIN?
<x> = 1 or 2
Example
:ZOOM1:MAIN 20
:ZOOM1:MAIN?
-> :ZOOM1:MAIN 20
:ZOOM<x>:POSition
Function Sets or queries the position of a zoom box.
Syntax
:ZOOM<x>:POSition {<NRf>}
:ZOOM<x>:POSition?
<x> = 1 or 2
<NRf>=−5to5(instepsof10divisions/display
record length)
Example
:ZOOM1:POSITION 2
:ZOOM1:POSITION?
-> :ZOOM1:POSITION 2.00E+00
:ZOOM<x>:VERTical?
Function Queries all vertical zoom settings.
Syntax
:ZOOM<x>:VERTical?
<x> = 1 or 2
:ZOOM<x>?
Function Queries all waveform zoom settings.
Syntax
:ZOOM<x>?
<x> = 1 or 2
:ZOOM<x>:ALLocation?
Function Queries all zoom source waveform settings.
Syntax
:ZOOM<x>:ALLocation?
<x> = 1 or 2
:ZOOM<x>:ALLocation:{CHANnel<y>|MATH
<y>}
Function Sets or queries the zoom source waveform.
Syntax
:ZOOM<x>:ALLocation:{CHANnel<y>|MATH
<y>} {<Boolean>}
:ZOOM<x>:ALLocation:{CHANnel<y>|MATH
<y>}?
<x> = 1 or 2
<y> of CHANnel<y> = 1 to 4 (1 or 2 for 2-channel
models)
<y> of MATH<y> = 1 or 2 (1 only for 2-channel
models)
Example
:ZOOM1:ALLOCATION:CHANNEL1 ON
:ZOOM1:ALLOCATION:CHANNEL1?
-> :ZOOM1:ALLOCATION:CHANNEL1 1
:ZOOM<x>:DISPlay
Function Sets or queries the on/off status of a zoom
waveform display.
Syntax
:ZOOM<x>:DISPlay {<Boolean>}
:ZOOM<x>:DISPlay?
<x> = 1 or 2
Example
:ZOOM1:DISPLAY ON
:ZOOM1:DISPLAY?
-> :ZOOM1:DISPLAY 1
:ZOOM<x>:FORMat
Function Sets or queries the format of a zoom waveform
display.
Syntax
:ZOOM<x>:FORMat {DUAL|HEXa|MAIN|QUAD|
SINGle|TRIad}
:ZOOM<x>:FORMat?
<x> = 1 or 2
Example
:ZOOM1:FORMAT DUAL
:ZOOM1:FORMAT?
-> :ZOOM1:FORMAT DUAL