YOKOGAWA DLM2000 Series User Manual

5-286
IM 710105-17E
5.36 XY Group
:XY<x>:MEASure:CURSor:DX:VALue?
Function Queries the voltage difference between the X-Y
display's horizontal cursors.
Syntax
:XY<x>:MEASure:CURSor:DX:VALue?
<x> = 1 or 2 (1 only for the DLM2022, DLM2032,
DLM2052)
Example
:XY1:MEASURE:CURSOR:DX:VALUE?
-> :XY1:MEASURE:CURSOR:DX:VALUE 6.000
E+00
:XY<x>:MEASure:CURSor:DY?
Function Queries all settings for the voltage difference
between the X-Y display's vertical cursors.
Syntax
:XY<x>:MEASure:CURSor:DY?
<x> = 1 or 2 (1 only for 2-channel models)
:XY<x>:MEASure:CURSor:DY:STATe
Function Sets or queries the on/off status of the voltage
difference between the X-Y display's vertical
cursors.
Syntax
:XY<x>:MEASure:CURSor:DY:STATe {<Bool
ean>}
:XY<x>:MEASure:CURSor:DY:STATe?
<x> = 1 or 2 (1 only for 2-channel models)
Example
:XY1:MEASURE:CURSOR:DY:STATE ON
:XY1:MEASURE:CURSOR:DY:STATE?
-> :XY1:MEASURE:CURSOR:DY:STATE 1
:XY<x>:MEASure:CURSor:DY:VALue?
Function Queries the voltage difference between the X-Y
display's vertical cursors.
Syntax
:XY<x>:MEASure:CURSor:DY:VALue?
<x> = 1 or 2 (1 only for 2-channel models)
Example
:XY1:MEASURE:CURSOR:DY:VALUE?
-> :XY1:MEASURE:CURSOR:DY:VALUE 6.000
E+00
:XY<x>:MEASure:CURSor:X<y>?
Function Queries all horizontal cursor settings for the XY
display.
Syntax
:XY<x>:MEASure:CURSor:X<y>?
<x> = 1 or 2 (1 only for 2-channel models)
<y> = 1 or 2
:XY<x>?
Function Queries all XY display settings.
Syntax
:XY<x>?
<x> = 1 or 2 (1 only for 2-channel models)
:XY<x>:DISPlay
Function Sets or queries the on/off status of the XY display.
Syntax
:XY<x>:DISPlay {<Boolean>}
:XY<x>:DISPlay?
<x> = 1 or 2 (1 only for 2-channel models)
Example
:XY1:DISPLAY ON
:XY1:DISPLAY?
-> :XY1:DISPLAY 1
:XY<x>:MEASure?
Function Queries all automated measurement settings for
the XY display.
Syntax
:XY<x>:MEASure?
<x> = 1 or 2 (1 only for 2-channel models)
:XY<x>:MEASure:CURSor?
Function Queries all cursor measurement settings for the
XY display.
Syntax
:XY<x>:MEASure:CURSor?
<x> = 1 or 2 (1 only for 2-channel models)
:XY<x>:MEASure:CURSor:DX?
Function Queries all settings for the voltage difference
between the X-Y display's horizontal cursors.
Syntax
:XY<x>:MEASure:CURSor:DX?
<x> = 1 or 2 (1 only for 2-channel models)
:XY<x>:MEASure:CURSor:DX:STATe
Function Sets or queries the on/off status of the voltage
difference between the X-Y display's horizontal
cursors.
Syntax
:XY<x>:MEASure:CURSor:DX:STATe {<Bool
ean>}
:XY<x>:MEASure:CURSor:DX:STATe?
<x> = 1 or 2 (1 only for 2-channel models)
Example
:XY1:MEASURE:CURSOR:DX:STATE ON
:XY1:MEASURE:CURSOR:DX:STATE?
-> :XY1:MEASURE:CURSOR:DX:STATE 1

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English