YOKOGAWA DLM2000 Series User Manual

5-77
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
5.6 CHANnel Group
:CHANnel<x>?
Function Queries all vertical axis settings of a channel.
Syntax
:CHANnel<x>?
<x> = 1 to 4 (1 or 2 for 2-channel models)
:CHANnel<x>:ASCale[:EXECute]
Function Executes auto scaling of a channel.
Syntax
CHANnel<x>:ASCale[:EXECute]
<x> = 1 to 4
Example
CHANNEL1:ASCALE:EXECUTE
Description Auto scaling is possible on each channel.
• V/div
Displayed so that the entire amplitude of the
waveform can be seen without changing the
vertical position.
• Offset
When the input coupling is set to AC,
0V
When the input coupling is set to DC,
Center = (Max+Min)/2
• Trig Level
DC offset position
:CHANnel<x>:BWIDth
Function Sets or queries the input filter setting of a channel.
Syntax
:CHANnel<x>:BWIDth {FULL|<Frequency>}
:CHANnel<x>:BWIDth?
<x> = 1 to 4 (1 or 2 for 2-channel models)
{<Frequency>} = See the DLM2000 Features
Guide for this information.
Example
:CHANNEL1:BWIDTH FULL
:CHANNEL1:BWIDTH?
-> :CHANNEL1:BWIDTH FULL
:CHANnel<x>:COUPling
Function Sets or queries the input coupling setting of a
channel.
Syntax
:CHANnel<x>:COUPling {AC|DC|DC50|GND}
:CHANnel<x>:COUPling?
<x> = 1 to 4 (1 or 2 for 2-channel models)
Example
:CHANNEL1:COUPLING AC
:CHANNEL1:COUPLING?
-> :CHANNEL1:COUPLING AC
:CHANnel<x>:DESKew
Function Sets or queries the deskew setting of a channel.
Syntax
:CHANnel<x>:DESKew {<Time>}
:CHANnel<x>:DESKew?
<x> = 1 to 4 (1 or 2 for 2-channel models)
<Time>=−100.0nsto100.0ns(in10-pssteps)
Example
:CHANNEL1:DESKEW 1NS
:CHANNEL1:DESKEW?
-> :CHANNEL1:DESKEW1.000E−09
:CHANnel<x>:DISPlay
Function Sets or queries the display on/off status of a
channel.
Syntax
:CHANnel<x>:DISPlay {<Boolean>}
:CHANnel<x>:DISPlay?
<x> = 1 to 4 (1 or 2 for 2-channel models)
Example
:CHANNEL1:DISPLAY ON
:CHANNEL1:DISPLAY?
-> :CHANNEL1:DISPLAY 1
:CHANnel<x>:INVert
Function Sets or queries the on/off status of invert mode,
which inverts the waveform display.
Syntax
:CHANnel<x>:INVert {<Boolean>}
:CHANnel<x>:INVert?
<x> = 1 to 4 (1 or 2 for 2-channel models)
Example
:CHANNEL1:INVERT ON
:CHANNEL1:INVERT?
-> :CHANNEL1:INVERT 1
:CHANnel<x>:LABel?
Function Queries all waveform label settings of a channel.
Syntax
:CHANnel<x>:LABel?
<x> = 1 to 4 (1 or 2 for 2-channel models)
:CHANnel<x>:LABel[:DEFine]
Function Sets or queries the waveform label of a channel.
Syntax
:CHANnel<x>:LABel[:DEFine] {<String>}
:CHANnel<x>:LABel[:DEFine]?
<x> = 1 to 4 (1 or 2 for 2-channel models)
<String> = Up to eight characters
Example
:CHANNEL1:LABEL:DEFINE "CH1"
:CHANNEL1:LABEL:DEFINE?
-> :CHANNEL1:LABEL:DEFINE "CH1"
Description You can only use the characters and symbols that
appear on the DLM2000 soft keyboard.

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English