xi
IM DLM5058-03EN
Safety Precautions
This product is designed to be used by a person with specialized knowledge.
This instrument is an IEC safety class I instrument (provided with a terminal for protective earth
grounding).
The general safety precautions described herein must be observed during all phases of operation.
If the instrument is used in a manner not specified in this manual, the protection provided by the
instrument may be impaired. YOKOGAWA assumes no liability for the customer’s failure to comply
with these requirements.
This manual is part of the product and contains important information. Store this manual in a safe
place close to the instrument so that you can refer to it immediately. Keep this manual until you
dispose of the instrument.
The following symbols are used on this instrument.
Handle with care. Refer to the user’s manual or service manual. This symbol appears
on dangerous locations on the instrument which require special instructions for proper
handling or use. The same symbol appears in the corresponding place in the manual
to identify those instructions.
Ground or the functional ground terminal (do not use as the protective earth ground terminal)
Alternating current
Direct current
ON (power)
OFF (power)
French
À manipuler délicatement. Toujours se reporter aux manuels d’utilisation et d’entretien.
Ce symbole a été apposé aux endroits dangereux de l’instrument pour lesquels
des consignes spéciales d’utilisation ou de manipulation ont été émises. Le même
symbole apparaît à l’endroit correspondant du manuel pour identifier les consignes
qui s’y rapportent.
Borne de terre ou borne de terre fonctionnelle (ne pas utiliser cette borne comme
prise de terre.)
Courant alternatif
Courant direct
Marche (alimentation)
Arrêt (alimentation)
To Next Page
Loading...
Need help?
General
