Common Operations
3-1
IM DLM5058-03EN
3
Chapter 3 Common Operations
3.1 Key and Jog Shuttle Operations
key Operations
How to Use Setup Menus That Appear When Keys Are Pressed
The operation after you press a key varies depending on the setup menu type.
A
C
D
E
F
FFT menu CURSOR menu MODE menu
Jog shuttle setting menu
B
C
A: The selected value switches each time you press the soft key.
B: A selection menu appears when you press the soft key.
Press the soft key that corresponds to the appropriate setting.
C: A dialog box, a keyboard, or a selection menu appears when you press the soft key.
Use the jog shuttle and the SET key (
) to configure the settings.
D: Pressing the soft key selects the item that you can control using the jog shuttle. The jog
shuttle setting menu shows the selected soft key setting. Depending on the setting, you
can set the value by moving between digits using the SET key.
E: A related setup menu appears when you press the soft key.
F: Pressing a soft key selects the corresponding option.
How to Display the Setup Menus That Are Written in Purple below the
Keys
In the explanations in this manual, “SHIFT+key name (written in purple)” is used to indicate
the following operation.
1.
Press SHIFT. The SHIFT key illuminates to indicate that the keys are shifted.
Now you can select the setup menus written in purple below the keys.
2.
Press the key that you want to display the setup menu of.
To Next Page
Loading...
Need help?
General
