2-2
IM DLM5058-03EN
2.1 Handling Precautions
Connecting a PC to the Instrument
Before connecting a PC to the USB port for PCs, ground the PC to the same electrical
potential as the instrument.
When Carrying the Instrument
Remove the power cord and connecting cables. When carrying the instrument, either hold the
handle or hold the instrument with both hands as shown in the figure below.
WARNING
• When you hold or put away the handle, be careful not to get your hand caught
between the handle and the case.
• When you carry the instrument, be careful not to get your hand caught between the
wall, installation surface, or other objects and the instrument.
French
AVERTISSEMENT
• Lorsque vous attrapez ou rabattez la poignée, veillez à ne pas vous coincer la main
entre la poignée et l’instrument.
• Lorsque vous déplacez l’instrument, veillez à ne pas vous coincer la main entre
l’instrument et le mur, la surface d’installation ou tout autre objet.
When Cleaning the Instrument
When cleaning the case or the operation panel, first remove the power cord from the outlet,
and then wipe with a dry, soft, clean cloth. Do not use chemicals such as benzene or thinner.
These can cause discoloring and deformation.
To Next Page
Loading...
Need help?
General
