4-9
IM DLM5058-03EN
External Signal I/O
4
Connecting the Cable
Connect a connection cable between the SYNC connector of this instrument and that of the target
instrument.
Connect the cable securely to the synchronous operation I/O connector, and check that it is locked
in place.
Note
• For details on the synchronous operation (DLMsync) feature, see the Features Guide, IM DLM5058-
01EN.
• For instructions on how to use synchronous operation (DLMsync), see the User’s Manual, IM DLM5058-
02EN.
4.5 Synchronous Operation I/O (SYNC)
To Next Page
Loading...
