Zebra DS4308 Reference Guide

USB Interface 8 - 3
4. On first installation when using Windows, the software prompts to select or install the Human Interface Device
driver. To install this driver, provided by Windows, click Next through all the choices and click Finished on the
last choice. The digital scanner powers up during this installation.
5. To modify any other parameter options, scan the appropriate bar codes in this chapter.
If problems occur with the system, see Troubleshooting on page 3-2.
USB Parameter Defaults
Table 8-1 lists the defaults for USB host parameters. To change any option, scan the appropriate bar code(s)
provided in the Parameter Descriptions section beginning on page 8-4.
NOTE See Appendix A, Standard Default Parameters for all user preferences, hosts, symbologies, and
miscellaneous default parameters.
Table 8-1 USB Host Default Table
Parameter Default
Page
Number
USB Host Parameters
USB Device Type HID Keyboard
Emulation
8-4
USB Country Keyboard Types (Country Codes) North American 8-6
USB Keystroke Delay No Delay 8-8
USB CAPS Lock Override Disable 8-8
USB Ignore Unknown Characters Enable 8-9
Emulate Keypad Disable 8-9
Emulate Keypad with Leading Zero Disable 8-10
USB FN1 Substitution Disable 8-10
Function Key Mapping Disable 8-11
Simulated Caps Lock Disable 8-11
Convert Case None 8-12
USB Static CDC Enable 8-12

Zebra DS4308 Specifications

General

Brand	Zebra
Model	DS4308
Category	Barcode Reader
Language	English