Zebra DS4308 - Scanner Emulation Interface; Introduction

Chapter 11 Scanner Emulation Interface
Introduction
This chapter describes how to set up the digital scanner with a Scanner Emulation host. Use this mode when you
need Scanner Emulation communication. In this mode, the digital scanner connects to an external decoder or to a
decoder integrated in a mobile computer or Point-of-Sale (POS) terminal.
Throughout the programming bar code menus, asterisks (
*) indicate default values.
*Parameter Process
and Pass-Through
Feature/Option
* Indicates Default
NOTE Most computer monitors allow scanning the bar codes directly on the screen. When scanning from the
screen, be sure to set the document magnification to a level where you can see the bar code clearly, and
bars and/or spaces are not merging.