Zebra DS4308 Reference Guide

13 - 2 DS3408 Product Reference Guide
Errors While Scanning
Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.
Symbology Parameter Defaults
Table 13-1 lists the defaults for all symbologies parameters. To change the default values, scan the appropriate bar
codes in this guide. These new values replace the standard default values in memory. To recall the default
parameter values, scan the *Set Defaults bar code on page 4-4.
NOTE See Appendix A, Standard Default Parameters for all user preferences, hosts, symbologies, and
miscellaneous default parameters.
Table 13-1 Symbology Default Table
Parameter
Parameter
Number
Default
Page
Number
Disable All Code Types 13-7
UPC/EAN
UPC-A 01h Enable 13-8
UPC-E 02h Enable 13-8
UPC-E1 0Ch Disable 13-9
EAN-8/JAN 8 04h Enable 13-9
EAN-13/JAN 13 03h Enable 13-10
Bookland EAN 53h Disable 13-10
Decode UPC/EAN/JAN Supplementals
(2 and 5 digits)
10h Ignore 13-11
User-Programmable Supplementals
Supplemental 1:
Supplemental 2:
F1h 43h
F1h 44h
13-14
UPC/EAN/JAN Supplemental Redundancy 50h 10 13-14
UPC/EAN/JAN Supplemental AIM ID
Format
F1h A0h Combined 13-15
Transmit UPC-A Check Digit 28h Enable 13-16
Transmit UPC-E Check Digit 29h Enable 13-16
Transmit UPC-E1 Check Digit 2Ah Enable 13-17
UPC-A Preamble 22h System Character 13-18
UPC-E Preamble 23h System Character 13-19

Zebra DS4308 Specifications

General

Brand	Zebra
Model	DS4308
Category	Barcode Reader
Language	English