Zebra DS4308 Reference Guide

Scanner Emulation Interface 11 - 13
Check For Decode LED
The attached decoder normally asserts the Decode line to signal to the Scanner Emulation host that it successfully
decoded the transmitted bar code. Some decoders, however, do not assert the Decode signal. In this case, the
digital scanner emits transmit error beeps to indicate that the bar code did not transmit. Scan the Ignore Decode
LED bar code to disable the Transmit Error beeps.
*Check For Decode LED
Ignore Decode LED

Zebra DS4308 Specifications

General

Brand	Zebra
Model	DS4308
Category	Barcode Reader
Language	English