15 - 32 DS3408 Product Reference Guide
Move Cursor to Last
Occurrence of String and
Replace All
This action replaces all occurrences of a selected string with another
user-defined string, and moves the cursor to the beginning of the
last occurrence. Scan
Move Cursor to Last Occurrence of String
and Replace All
, then enter an alphanumeric string representing the
character(s) (up to 10) to match and delete using the
Alphanumeric
Keyboard
. Scan the
End of Message
. Enter another alphanumeric
string representing the character(s) (up to 10) to insert using the
Alphanumeric Keyboard
. Scan
End of Message
.
15-33
Skip to End Scan
Skip to End
to move the cursor to the end of the data.
15-34
Skip Ahead “N” Characters Scan one of these bar codes to select the number of positions
ahead to move the cursor.
15-34
Skip Back “N” Characters Scan one of these bar codes to select the number of positions back
to move the cursor.
15-36
Send Preset Value Send Values 1 through 6 by scanning the appropriate bar code. Set
these values using the prefix/suffix values in
Table 7-4 on page
7-20
.
Value 1 = Scan Suffix
Value 2 = Scan Prefix
Values 3-6 are not applicable
15-38
Table 15-2
Setup Field(s) Definitions (Continued)
Parameter Description Page
To Next Page
Loading...
